The SA-143 Strainer Housing Adapter is a replacement part manufactured by B&G Equipment Company and is specifically sold for use as a replacement part for B&G sprayers. The Strainger Housing adaper connects to the mesh strainer, an important part of the Extenda Ban Valve which helps to keep the valve from leaking and reducing the quality of the spray pressure. The Strainer Housing protects the mesh strainer and is located on the Extenda-Ban valve packing. The Strainer housing can experience wear and tear over time and should be replaced periodically.

Tools Needed

To use the Strainer Housing adapter, you will need the appropriate B&G Sprayer to replace the part on and possibly a pair of pliers or a crescent wrench if the parts are tightly secured.

How to Use

• Step 1: Detach the Valve and Extension from the hose.Carefully remove the mesh strainer.Squeeze the Trigger to drain all liquid from the Valve. You can refer to the repair manual instructions for details on how to specifically do this.
• Step 2:After taking apart the assembly, remove the old strainer Housing and replace with the new Strainer adapter.
• Step 3: Put your B&G Sprayer back together and test it out to ensure it is working properly with no leaks.

Where to Use

The SA-143 Strainer Housing Adapter is meant to be used only for replacement on a B&G Sprayers with Extenda Ban Valves.

When to Use

Replace the SA-143 Strainer Housing Adapter when it has been damaged or you are experiencing a dip in spray pressure quality. How often this part is changed depends on how often you use the sprayer. If it is heavily used, the part wears and tears quicker. Typically at minimum we suggest changing it out annually.

Safety Information

Be sure to wear gloves when handling the B&G sprayer parts, as there may be residue from chemicals or buildup on the sprayer parts. Be sure to properly drain and clean the sprayer parts before performing maintenance. Keep small items like this gasket out of reach of pets and children as they may swallow it.

Special Considerations

Along with the SA-143 Strainer Housing Adapter, it would be smart to replace all the other small parts on the B&G Sprayer rather than just a single part at a time. Set a maintenance schedule for your sprayer and change out all the parts in one shot to save time so your sprayer can stay in good working condition.