The B&G Strainer Kit - Part MS 145-50, manufactured by B&G, is a replacement part manufactured by B&G Equipment Company and is specifically sold for use as a replacement part for B&G sprayers.

The mesh strainer is an important part of the Extenda Ban Valve as it helps to keep the valve from leaking and reducing the quality of the spray pressure.

The mesh strainer is located on the Extenda-Ban valve packing. These parts experience wear and tear over time and should be replaced periodically.

Tools Needed

To use this part, you will need the appropriate B&G Sprayer to replace the part on and possibly a pair of pliers or a crescent wrench if the parts are tightly secured.

How to Use

• Step 1: Detach the Valve and Extension from the hose.Carefully remove the mesh strainer.Squeeze the Trigger to drain all liquid from the Valve. You can refer to the repair manual instructions for details on how to specifically do this.
• Step 2:After taking apart the assembly, remove the old mesh strainer and replace with the new mesh strainer piece.
• Step 3: Put your B&G Sprayer back together and test it out to ensure it is working properly.

Where to Use

The B&G Strainer Kit - Part MS 145-50 is meant to be used only for replacement on a B&G Sprayers with Extenda Ban Valves.

When to Use

Replace the B&G Strainer Kit - Part MS 145-50 when it has been damaged or you are experiencing a dip in spray pressure quality. How often this part is changed depends on how often you use the sprayer. If it is heavily used, the part wears and tears quicker. Typically at minimum we suggest changing it out annually.

Safety Information

B&G Strainer Kit - Part MS 145-50 is safe to use around children and pets when applied according to the product label instructions. Always wear the appropriate personal protective equipment (PPE) when handling or applying this product. 

Be sure to properly drain and clean the sprayer parts before performing maintenance.

Keep out of reach of pets and children.

Special Considerations

Along with the mesh strainer, it would be smart to replace all the other small parts on the B&G Sprayer rather than just a single part at a time. Set a maintenance schedule for your sprayer and change out all the parts in one shot to save time so your sprayer can stay in good working condition.