The Best Hose End Sprayers For Pesticides

A hose-end sprayer is a piece of equipment that attaches to the end of any standard garden hose. It has a reservoir for holding pesticides or other lawn treatment products that mix with water as you spray. Hose-end sprayers are ideal for broadcast treatments that cover a large area, such as a yard or large garden. They are also a simple and more economical option compared to large spray rigs.

Recommendation

At Solutions Pest & Lawn, we recommend the Solutions Hose End Sprayer. It has a durable polyethylene construction and fits onto any hose end. It also has a fan-spray nozzle for quick coverage of large areas, which is removable for more direct applications, making it a versatile tool of great value.

User Guide

Step 1: Fill the Reservoir

After determining how much spray you would like to create, use the markings along the side to fill the reservoir to the required level to produce the desired amount of spray. Once filled, attach it to the green top of the sprayer and make sure to screw it down tight.

Step 2: Secure the Sprayer to the Hose

Using the universal hose fitting, attach the sprayer to the end of your garden hose. Make sure the connection is secure before spraying to prevent leakage.

Step 3: Spray

Once the sprayer is filled and secured to the end of your garden hose, turn on the water pressure, point the sprayer where you want to spray it and push the thumb switch to the ON position. The sprayer will mix the product with water as you spray. Keep the sprayer moving throughout the application to avoid overspraying one area.

You should load the sprayer only with the amount of product required for your application so that when it is complete, the sprayer’s reservoir will be empty.

To prevent back-siphoning, spray water through the sprayer for a few seconds after the reservoir empties. Our recommended unit also has a built-in anti-siphoning feature.

Inspection and Maintenance

Due to the Solutions Hose End Sprayer's simple construction, very little maintenance is required. Ensure you empty the reservoir with each use and rinse the unit before leaving it in an open area to dry. Store the unit in a cool, dry place between uses.

Parts

The Solutions Hose End Sprayer consists of the reservoir, the fitting, the fingertip on/off control, and the nozzle.

The Reservoir

This clear plastic container holds your unmixed pesticide or herbicide product. The reservoir attaches to the sprayer's green lid. Use the level markings along the side to measure the amount of unmixed product required to produce the desired amount of spray.

The Fitting

The fitting is on the back of the green lid. This is the part that attaches to your hose. To attach, screw the fitting into the hose end directly. It should fit any standard garden hose.

The Fingertip ON/OFF Control

A black toggle switch is on the side of the sprayer's lid. When pressed forward to the ON position, the sprayer allows water to pass freely through it while mixing in your herbicide or pesticide product from the reservoir.

The Nozzle

The “business end” of the sprayer. The Chapin comes with a removable fan-spray nozzle. If a more direct stream is needed for your application, just unscrew the nozzle and set it aside. The nozzle can also be rotated 180 degrees to aim the fan spray upward. This is ideal for spraying the underside of porches, structures, and leaves.

Key Takeaways

• A hose end sprayer is an economical option for those who need to make a broadcast application, but not so often that more specialized equipment is required.
• Make sure not to overfill the reservoir. It should be emptied at the end of your application.
• Once the reservoir is emptied, let the water continue to flow through the sprayer for a few seconds to prevent the pesticide product from back-siphoning into your garden hose.