Solutions Hose End Sprayer

Solutions Hose End Sprayer, manufactured by Solutions Pest and Lawn, is a ready-to-use hose-end sprayer that fits on any hose-ends and containers for quick and efficient applications of herbicides, fungicides, insecticides, surfactant, water-soluble fertilizers, and pesticide material.

With its innovative design, the Solutions Hose End Sprayer allows professionals and do-it-yourself homeowners ample versatility to handle most spraying duties at a downward or upward angle on various application sites such as gardens or lawns and higher elevated areas like trees.

Solutions Hose End Sprayer conveniently eliminates the pre-mixing process of pesticides and features a thumb dial designed to let the operator adjust spray patterns to various ratios.

• Setting A) outputs 100 ounces of water per 1 fluid ounce of product (1 oz. to 100 oz. of water). 
• Setting B) outputs 50 ounces of water per 1 fluid ounce of product (1 oz to 50 oz. of water).
• Setting C) outputs 30 ounces of water per 1 fluid ounce of product (1 oz. to 30 oz. of water).
• Setting D) outputs 20 ounces of water per 1 fluid ounce of product (1 oz. to 20 oz. of water).
• Setting E) outputs 5 ounces of water per 1 fluid ounce of product (1 oz. to 5 oz. of water).
• Setting O) There’s also a setting when you want to water your lawn and output no product (only water being applied).

Tools Needed

You will need a hose connected to a water source and your desired choice of pesticide, insecticide, surfactant, herbicide, fungicide, or water-soluble fertilizer.

The Solutions Hose End Sprayer includes the bottle, the mixing head with a connector, a suction pipe with a built-in filter, a fan nozzle attachment, and an on/off valve.

How to Use

• Step 1: Determine how much product material to use by measuring the square footage of the treatment area. To do this, measure the length and width of the treatment area in feet, then multiply them together (length X width = square footage).
• Step 2: Ensure the water is turned off before attaching the Solutions Hose End Sprayer to the selected hose. Remove the sprayer reservoir from the nozzle while the sprayer control valve is off. Pour the chemical into the reservoir bottle and mix according to the product label instructions. Once filled, connect the filled reservoir bottle back under the ratio mix head.
• Step 3: Connect the garden hose with the valve or hose-end adapter. Once securely attached, switch the control valve to the on position, then spray according to the product label instructions. Adjust the spray pattern to a suitable ratio such as (Setting A) 100:1, (Setting B) 50:1, (Setting 3) 30:1, (Setting D) 20:1, and (Setting E) 5:1. These ratios are product to water, so 5:1 would be 5 ounces of water to 1 oz. of product. When finished, turn the control valve to the off position and turn off the water source before removing the Solutions Hose End Sprayer reservoir.

Where to Use

Should only be used outdoors on medium to large treatment areas such as lawns, trees, shrubs, ornamental gardens, plant rows, vegetable gardens, crops, and around the exterior perimeter of homes or commercial structures.

When to Use

Use the Solutions Hose End Sprayer when you do not wish to pre-mix herbicides, water-soluble fertilizers, surfactants, fungicides, and other pesticide material on large treatment areas against pests, weeds, fungi, and more.

Safety Information

Solutions Hose End Sprayer is safe to use around children and pets when applied according to the manual instructions. Always wear the proper personal protective equipment (PPE) when mixing pesticide material and handling this product.

Keep out of reach of children and pets.

Special Considerations

Water does not need to be added to the Solutions Hose End Sprayer tank since it will pre-mix with water when spraying.

We recommend creating a solution of 1 part water, 1 part pesticide, and 1 part surfactant inside the sprayer's bottle to enhance your application. Alternatively, you can also create a 2-part water, 1-part pesticide solution. This will ensure enough water is applied to drive the product deep into the soil.

Note: Setting (A) results 100 times the amount of water being delivered from the water hose versus the amount of liquid in the container.   

Example: 12 oz. of liquid applied, results in 1200 oz. of water from the water hose. (1200 divided by 128 = 9.37 gallons of water from the hose applied to the treated area).