The B&G NG-146 Nylon Gasket is a replacement part manufactured by B&G Equipment Company and is specifically sold for use as a replacement part for B&G sprayers. The gasket is an important part of the sprayer assembly as it helps to prevent air from leaking from the mechanism, thus reducing the pressure. This small gasket is located on the Extenda-Ban Wand, close to mesh screen and screen support. NG-146 is one of the many B&G replacement parts in the B&G Gasket Kit.These parts experience wear and tear over time and should be replaced on occasion.

Tools Needed

To use this part, you will need the appropriate B&G Sprayer to replace the part on and possibly a pair of pliers or a crescent wrench if the parts are tightly secured.

How to Use

• Step 1: Take the spray assembly apart. You can refer to the repair manual instructions for details on how to specifically do this.
• Step 2:After taking apart the assembly, remove the old gasket and replace with the new replacement Nylon gasket.
• Step 3: Put your B&G Sprayer back together and test it out to ensure it is working properly.

Where to Use

The B&G NG-146 Nylon Gasket is meant to be used only for replacement on a B&G Sprayers. There are other models it can also fit.

When to Use

Replace the B&G NG-146 Nylon Gasket when it has been damaged or you are experiencing a dip in spray pressure quality. How often this part is changed depends on how often you use the sprayer. If it is heavily used, the part wears and tears quicker. Typically at minimum we suggest changing it out annually.

Safety Information

Be sure to wear gloves when handling the B&G sprayer parts, as there may be residue from chemicals or buildup on the sprayer parts. Be sure to properly drain and clean the sprayer parts before performing maintenance. Keep small items like this gasket out of reach of pets and children as they may swallow it.

Special Considerations

Along with the B&G NG-146 Nylon Gasket, it would be wise to replace all the other small parts on the B&G Sprayer rather than just a single one at one time. Set a maintenance schedule for your sprayer and change out all the parts in one shot to save time so your sprayer can function like normal again.