Features: Sold by the individual part

P-274 Brass Cap (22029700) by B&G Equipment Company is specifically sold for use as a replacement part for B&G sprayers. The cap is an important part of the sprayer as it is the barrier between the liquid that you keep in the sprayer. A worn cap can lead to air and liquid leaks and can lessen the effectiveness of your sprayer overall so it should be replaced periodically.

Tools Needed

To use this part, you will need the appropriate B&G Sprayer to replace the part on and possibly a pair of pliers or a crescent wrench if the parts are tightly secured.

How to Use

• Step 1: Simply twist the cap off of the B&G Sprayer and check for wear.
• Step 2:Replace with the new sprayer cap and twist the cap onto the pump assembly.
• Step 3: Put your B&G Sprayer back together and you are ready to get back to spraying.

Where to Use

The Brass Cap is meant to be used only for replacement on a B&G handpump sprayer such as the N124 and similar models. There are other models it can also fit.

When to Use

Replace the brass cap when it has been damaged or you are experiencing leaks or a lack of air pressure and spraying quality when using your B&G Sprayer. How often this part is changed depends on how often you use the sprayer. If it is heavily used, the part wears and tears quicker. Typically at minimum we suggest changing it out annually.

Safety Information

Be sure to wear gloves when handling the B&G sprayer parts, as there may be residue from chemicals or buildup on the sprayer parts. Be sure to properly drain and clean the sprayer parts before performing maintenance. Keep small items like this cap out of reach of pets and children.

Special Considerations

Along with the brass cap, it would be wise to replace all the other small parts on the B&G Sprayer rather than just a single one at one time. Set a maintenance schedule for your sprayer and change out all the parts in one shot to save time so your B&G sprayer can function like normal again.