P-275 Brass Handle (22029800), manufactured by B&G Equipment Company, is a replacement brass handle that is a vital part of the B&G sprayer as it is needed to pump and pressurize the sprayer.

Features a brass design for continuous years of use in commercial or residential settings with the application of harsh chemicals.

P-275 Brass Handle (22029800) is durable and can fit all standard B&G sprayers to make movement of heavy-weight sprayers more convenient.

Tools Needed

To use P-275 Brass Handle (22029800), you will need the appropriate B&G Sprayer to replace the part on and possibly a pair of pliers or a crescent wrench if the parts are tightly secured.

How to Use

• Step 1: Take the old P-275 Brass Handle (22029800) from the pump assembly and twist it off of the sprayer. You can refer to the repair manual instructions for details on how to specifically do this but it is fairly simple to do.
• Step 2: After taking off the old handle, put the new P-275 Brass Handle (22029800) in its place.
• Step 3: Put your B&G Sprayer back together and you are back in business.

Where to Use

The P-275 Brass Handle (22029800) is meant to be used only for replacement on a B&G handpump sprayer such as the N124 and similar models. There are other models it can also fit.

When to Use

Replace the P-275 Brass Handle (22029800) when it has been damaged or you are experiencing reduced spray pressure quality. How often this part is changed depends on how often you use the sprayer. If it is heavily used, this part wears and tears quicker. Typically at minimum we suggest changing it out annually.

Safety Information

P-275 Brass Handle (22029800) is safe to use around children and pets when applied according to the product label instructions. Always wear the proper personal protective equipment (PPE) when installing and handling this product.

Be sure to properly drain and clean the sprayer parts before performing maintenance.

Keep out of reach of children and pets.

Special Considerations

Along with the P-275 Brass Handle (22029800), it would be wise to replace all the other small parts on the B&G Sprayer rather than just a single one at one time. Set a maintenance schedule for your sprayer and change out all the parts in one shot to save time.

The P-275 Brass Handle (22029800) no longer comes with the rubber grip on the handle.