Hypro 6500C-R Roller Pump

The Hypro 6500C-R Roller Pump, manufactured by Pentair/Hypro, is an integral part of pesticide spray rigs.

The purpose of Hypro clockwise rotation roller pumps to transfer a variety of fluids for pest control and lawn care applications. The Hypro 6500C-R has the ability to deliver a max flow of 21.8 GPM and a max pressure of 300 PSI. Constructed with cast-iron and stainless steel, they are durable and built to last.

The Hypro 6500C-R comes on our Solutions custom-built spray rigs but are sold separately when you need to replace a pump for your rig.

Tools Needed

To use this product, you will need to install it onto a pesticide spraying rig.

For this, you will need a base plate (sold separately), two Lovejoy couplets and a pressure regulator. You will also need a strainer to catch any debris.

How to Use

• Step 1: Following the system installation instructions in the Hypro 6500C-R Roller Pump service manual, install the roller pump in your pesticide spraying rig system. The Pump connects to the gas engine via 2 Lovejoy couplets, and you will need to mount it on a base plate that will hold it onto the frame and then configure plumbing.
• Step 2: Prime the pump by making sure all connections are tight and do not leak air. Also, make sure the strainer line is free of debris. If the pump does not self-prime, disconnect the suction hose, fill it with water and reconnect it to the liquid source. A squirt of oil into the pump ports will help to prime by sealing clearances.
• Step 3: After every application, flush the pump with a cleaning solution that will neutralize the liquid pump then flush it with a 50-50 solution of car antifreeze and water to prevent corrosion. Turn the shaft several times to drawl the protective liquid through the pump to coat the entire inner surface and then drain the pump and plug the ports to keep air out.

Where to Use

The Hypro 6500C-R Roller Pump can be used on power sprayers and pesticide spraying rigs and is essentially the heart of the sprayer. It can be used as part of a spraying rig on industrial sites, residential areas or agricultural settings.

When to Use

Use this pump to replace an older Roller Pump that has lost pressure on your power sprayer or spraying rig. It is great for applications requiring high volume but not high pressure.

This pump is a clockwise rotation pump. A 6500C is needed if the rotation requirement is for counterclockwise rotation, such as is needed for a PTO drive source.

Safety Information

The Hypro 6500C-R Roller Pump is safe to install and operate when done so by following the service manual instructions. Always wear the proper personal protective equipment (PPE) when operating and maintaining the roller pump.

Special Considerations

Never pump corrosive or abrasive liquids, as these will cause rapid wear or deterioration of the pump's body, rotor, shaft, and seals. This product should be used only with liquids compatible with pump component materials. Never exceed the maximum specified rpm and pressure. Never run the pump dry. Failure to follow this warning will void the product warranty.

This pump is a clockwise rotation roller pump.

Please note: A Love joy couplers, spider gasket, and 4 shims are needed to make the pump run. You will need to know the shaft size for the Lovejoy couplers. The spider gasket is universal. Sold Separetly.

We do not accept returns on equipment or electronics; all sales are final. We do this to ensure that the products we send out are brand new, never opened, and fully operational for our customers and that the packages are covered by their respected manufacturer's warranties.