Philips 36w x 24” Actinic Replacement Bulb, manufactured by Pelsis, is a efficient 36-watt UV bulb made to save energy and cost by reducing continual replacement to once a year for the Exocutor 80 Fly Light.

With an optimized spectrum, this easy to use product captures the interest of flies and other flying pests while also being easy on the users eyes.

Philips 36w x 24” Actinic Replacement Bulb is a perfectly balanced UV bulb that provides 8000 hours of fly control for greater fly control in various indoor sites.

Tools Needed

No application tools are necessary to install the Philips 36w x 24” Actinic Replacement Bulb.

How to Use

• Step 1: To replace the Philips 36w x 24” Actinic Replacement Bulb, you will need to remove the catch tray and turn off the power to the unit.
• Step 2: Rotate the Philips 36w x 24” Actinic Replacement Bulb through 90 degrees, freeing it from the tube holders.
• Step 3: Pull the Philips 36w x 24” Actinic Replacement Bulb away from the chassis.
• Step 4: Dispose of the used UV tubes in conjunction with local WEEE regulations.

Where to Use

Use the Philips 36w x 24” Actinic Replacement Bulb only with the Exocutor 80 Fly Light.

When to Use

Replace the Philips 36w x 24” Actinic Replacement Bulb on an annual basis or at least once a year.

Safety Information

Philips 36w x 24” Actinic Replacement Bulb is safe to use around children and pets when installed according to the product manual instructions. Always wear the proper personal protective equipment (PPE) when installing this product.

Keep out of reach of children and pets.

Special Considerations

After twelve months the phosphor coating on the Philips 36w x 24” Actinic Replacement Bulb that emits the correct wavelength of UV light has burnt away and the UV output is diminished substantially.