The BirdXPeller Pro Audio Bird Deterrent, manufactured by Bird-X Inc., gets rid of birds by emitting a variety of naturally recorded distress calls and predator cries that confuse, frighten, and disorient pest birds.

The digital sounds warn birds of an emergency and to stay away. The ultrasonic repellents are completely programmable and utilize real sounds with clear and high -definition playback.

The BirdXPeller Pro Audio Bird Deterrent is a safe and humane solution to protect your property from bird infestion. 

Tools Needed

Mounting bracket and screws are included. You will need a screwdriver to attach the BirdXpeller PRO mount to a post. 

How to Use

Step 1: Point unit toward the bird infestation while setting on a flat surface using the included mounting bracket and screws. 

Step 2: Plug the AC adapter into the Power jack and plug adapter into any standard electrical outlet.

Step 3: Set the DIP switches located on the front metal faceplate of the unit to the desired settings and then turn the volume switch to Low (minimum).

Step 4: Turn the power switch, in the upper right corner, to INT.EXT SPKR (on position). Adjust volume to the desired level.

Step 5: After turning the unit OFF, be certainn to wait AT LEAST 60 seconds before turning it back on to allow the electronics to properly reset. Close the cover and latch shut.  

Where to Use

For use outdoors only as a bird repeller. Recommended places to place the BirdXPeller are on public parks and beaches, homes, gardens and patios, storage building, waterfront properties and docks.

When To Use

The BirdXPeller Pro can be used at any time, but it is suggested to turn it off when people are present for long periods of time. For best results begin using the BirdXPeller Pro before spring when pests begin to come out more often.

Safety Information

Be cautious when turning the volume dial since the unit may in an inactive state when the dial is rotated. It could then reactivate at a very high level of sound which could be painful to your ears. 

Special Considerations

Do not install device during raining or snowing conditions. Having the cover open during wet conditions would expose the inside of the control unit to water. Read the entire instruction guide before installation.