Manufactured by BASF, Termidor 80 WG Termiticide/Insecticide is a water-soluble powder formulated with 80% fipronil. This highly concentrated insecticide controls for termites, beetles, cockroaches, silverfish, and more.

Termidor 80 WG is great for treating construction sites before foundations are poured, treating outside or inside perimeters of residential or commercial building structures. Termidor 80 WG provides a long term residual effect that provides an insect barrier for up to 6 months. Termidor 80 WG Termiticide/Insecticide is a strong and effective product to have when offering customers the best defense against termites or other targeted pests.

Tools Needed

For spraying apply Termidor 80 WG Termiticide/Insecticide with a skid sprayer with a hose that has an anti-backflow device or water flow with an air gap to prevent back-siphoning is needed. For injecting treatments, a drill with a masonry bit is needed. A proper tool for trenching is needed to remove and replace the dirt. For rodding, a hammer and rebar for making the holes are needed.

How to Use

• Step 1: Remove the Termidor 80 WG packs from the foil package.
• Step 2: Fill the spray tank 1/4 to 1/3 of the way with water.
• Step 3: Start the pump to begin bypass agitation and place the spray gun in the spray tank to allow circulation through the hose.
• Step 4: Drop the correct amount of dissoluble Termidor 80WG packs and the rest of the water into the spray tank to mix the desired amount of diluted solution.
• Step 5: Allow the pump to run and circulate through the hose back into the spray tank until all packs in the spray tank have dissolved and the Termidor 80 WG is thoroughly mixed. Apply Termidor 80 WG as needed.

Where to Use

Termidor 80 WG can be applied at pre and post building sites, in crawl spaces, on and under concrete slabs in basements, hollow block foundations or voids, under foundations and slabs, around the soil near shower drain pans or bath traps. It can be applied outdoors on trees, around or injected under pre-existing foundations. Termidor 80 WG should only be used indoors when spraying in structural voids or on attached garage floors.

When to Use

Termidor 80 WG can be applied to preventative or eliminate a termite or insect infestation.  Termidor 80 WG can only be re-applied if it is obvious the first application has faded, or there is a clear sign of re-infestation.

Safety Information

Termidor 80 WG Termiticide/Insecticide is safe to use when applied according to the product label. Do not apply Termidor 80 WG near electrical hazards, to houseboats, playground equipment, near pet habitats, or within 60 feet of estuaries.

Special Considerations

Before applying Termidor 80 WG, make sure it cannot drain or run off into neighboring areas where children or pets can come in contact. Termidor 80 WG will dissolve faster when mixed with warm/hot water. Also, Termidor 80 WG is a restricted product and sold to licensed pest control providers.

Bucket Contains: 6 packs x 4 packets x 2.61 oz