Pendulum 2G

Pendulum 2G, manufactured by BASF, is a quality pre-emergent granular herbicide that controls many common broadleaf and grassy weeds, such as crabgrass and sandbur.

With its granule formulation and active ingredient pendimethalin 2.0%, this pre-emergent herbicide successfully prevents more than 40 broadleaf and grassy weeds from germinating without harming ornamental foliage.

Using Pendulum 2G before the growing season will keep many notorious weeds from germinating on your land. It is economically priced and can last you for years as a low rate is needed to cover most typical lawn applications.

Tools Needed

It should be applied using a mechanical or broadcast spreader. A hand or push spreader is recommended for home use.

It also needs to be watered in after application if rainfall cannot be expected so that a sprinkler can be helpful.

How To Use

• Step 1: Identify what weeds you wish to control and what areas they are in. Calculate the square footage area you wish to apply to, as this will determine how much Pendulum 2G needs to be applied. You can do this by measuring the treatment areas' length and width in feet, then multiplying them together (length X width = square footage). For acreage, take the square footage and divide it by one acre (square footage / 43,560 sq. ft. = acres). The rate on the Pendulum 2G label is 2.3 to 4.6 lbs. per 1,000 sq. ft. or 100 to 200 lbs. per acre in ornamentals. Before application, ensure there are no established weeds in the area. Remove them or apply a post-emergent herbicide before applying the Pendulum 2G.
• Step 2: Based on your calculations, pour the required product into your spreader and apply an even coating to the desired area. Be sure not to overlap so there isn't a larger concentration in one area.
• Step 3: If adequate rainfall is unavailable, water the treated area after application to ensure the product is activated correctly.
• Step 4: Reapply this product as needed. Follow label instructions for proper application rates, as they can vary depending on the season and the types of weeds you wish to control.

Where to Apply

Apply Pendulum 2G over your turf and ornamental gardens. This product can be used around the home or in large-scale instances such as railroads, parking lots, vacant lots, and more. 

When to Apply

This product is a pre-emergent herbicide, which means it only kills weeds that have not sprouted and germinated. Apply this product before the weeds have grown to prevent them before the season starts. This time frame can vary depending on your climate and the types of weeds you wish to avoid.

Delay reseeding or winter overseeding of treated turfgrass for at least 3 months following the last Pendulum 2G application. Delay sprigging turfgrass for 5 months after application.

Safety Information

Pendulum 2G is safe to use around pets and children when applied according to the product label instructions. Always wear the proper personal protective equipment (PPE) when applying this product.

Keep people and pets out of treated areas until 24 hours have passed after application. 

Special Considerations

Pendulum 2G will not kill previously sprouted and established weeds. If established weeds are present in the area, they must be removed or treated with a post-emergent herbicide. Some types of grasses and plants may be sensitive to the active ingredient of Pendulum 2G, so read the label before application to ensure your plants are not injured.

Avoid unintentional contact of granules with driveways, stone, wood or other porous surfaces. Sweep immediately to avoid staining. If granules are crushed into the surface, rinse thoroughly.