Coastal Mosquito 45 Degree Copper Risers is a kit manufactured by Coastal Mosquito and designed to connect multiple pieces tubing lines to spray mosquito control products around various outdoor areas. This system will ensure that your mosquito misting system misting line is adequately covering the entire area for optimum mosquito control.

Tools Needed

For best results when installing this 45 Degree Copper Riser kit you will need a tubing cutter, screw gun, clamps, and screws (the type of screw needed depends on where the tubing line is run).

How to Use

• Step 1: Measure the length of tubing needed and locate the area the riser will be placed. It is suggested to place a nozzle approximately every 20 feet. Refer to the instruction manual for your mosquito misting system for placement details.
• Step 2: Use the tubing cutter to cut the tubing in the exact area where the riser will be fitted.
• Step 3: Put a clamp around the tubing close to the riser and screw it to the surface area to secure the riser in place.
• Step 4: Make sure there are no leaks between connecting the tee to the tubing and adjust the risers to spray in the desired direction.

Where to Use

Use a 45 Degree Copper Riser kit to add misting areas and even coverage around flower beds and other areas outdoors where a nozzle would be hard to place. The risers can also be installed in areas on the ground around gardens, driveways or sidewalks by using risers.

When to Use

This 45 Degree Copper Riser Kit is great to use when outdoor areas have multiple angles that need mosquito control.

Safety Information

Coastal Mosquito 45 Degree Copper Risers are safe to use around humans and pets. Be sure to adjust the nozzle so that mosquito control products are not being sprayed directly people or pets.

Special Considerations

Before installing Coastal Mosquito 45 Degree Copper Risers, measure out the length of tubing needed first, then find the locations where the risers will be most beneficial.