Mosquito Misting System 15 Inch Copper Riser (Risers Only)

The Copper Risers is designed to connect multiple tubing lines to distribute mosquito control products evenly across outdoor areas. It ensures full coverage for effective mosquito control with your misting system.

Tools Needed

For optimal installation, you will need a tubing cutter, screw gun, clamps, and screws. The type of screws depends on the surface where the tubing is mounted.

How to Use

• Step 1: Measure the tubing length required and choose the riser placement. Place nozzles about every 20 feet. Consult your misting system manual for exact placement.
• Step 2: Cut the tubing precisely where the riser will attach using a tubing cutter.
• Step 3: Secure a clamp around the tubing near the riser and fasten it to the surface to hold the riser firmly.
• Step 4: Check for leaks at the tee connection with the tubing and adjust risers to spray in the desired directions.

Where to Use

Use Copper Risers to extend misting coverage around flower beds and outdoor spaces where placing nozzles is difficult. They can also be mounted near gardens, driveways, or sidewalks.

When to Use

This kit is ideal for outdoor areas with multiple angles requiring mosquito control coverage.

Safety Information

Copper Risers are safe around people and pets. Always adjust nozzles to avoid spraying mosquito control products directly on humans or animals.

Special Considerations

Before installation, measure the tubing length accurately and plan riser locations to ensure effective coverage.