Koroseal Expansion Ring #6 by B&G Equipment Company is specifically sold for use as a replacement part for B&G Sub Slab Injectors.The Koroseal Expansion Ring #6 is used together with the compression ring and tip adapter to secure all pieces together. These parts experience wear and tear over time and should be replaced periodically.

Tools Needed

To use this part, you will need the appropriate B&G Termite Tool to replace the part on and possibly a pair of pliers or a crescent wrench if the parts are tightly secured.

How to Use

• Step 1: Take the Sub Slab injector apart. You can refer to the repair manual instructions for details on how to specifically do this.
• Step 2: After taking apart the assembly, remove the old KoroSeal expansion ring gasket from the compression ring and tip and replace with the new one.
• Step 3: Put your B&G Sub slab injector back together and you are back in business.

Where to Use

The Koroseal Expansion Ring #6 is meant to be used only for replacement on a B&G Sub Slab Injector termit tool.

When to Use

Replace the Koroseal Expansion Ring #6 when it has been damaged or worn out. How often this part is changed depends on how often you use the Sub Slab Injector. If it is heavily used, the part wears and tears quicker. Typically at minimum we suggest changing it out annually.

Safety Information

Be sure to wear gloves when handling the B&G sprayer parts, as there may be residue from chemicals or buildup on the sprayer parts. Be sure to properly drain and clean the sprayer parts before performing maintenance. Keep small items like this expansion ring out of reach of pets and children as they may swallow it.

Special Considerations

Along with the Koroseal Expansion Ring #6, it would be wise to replace all the other small parts on the Sub Slab Injector rather than just a single one at one time. Set a maintenance schedule for your termite tool and change out all the parts in one shot to save time.