The B&G Sub Slab Injector S SI-4 18", manufactured by B&G, is designed to treat beneath concrete slabs even when the flooring is covered with tile.

This easy to use Sub Slab Injector comes with the added bonus of splash-back protection on your flooring and a shut off valve to prevent termiticide product from dripping on your floors.  Tools Needed

To use the B&G Sub Slab Injector, you will need a professional spray rig with a hose to attach for this tool to deliver the product or the B&G Versatool. We suggest a 50-gallon skid sprayer. You will also need a power drill for drilling holes with a 9/16" drill bit. We also recommend wearing eye protection and latex or nitrile gloves for added protection.

How to Use

Step 1: Start by inspecting the sub slab injector hose and connections to the Versatool or spraying rig it is connected to to ensure everything is properly connected.

Step 2: Drill a 9/16" hole for treating under concrete slabs.

Step 3: Spray at low pressure to apply product, use rate of application based on label for chemical. This will apply the chemical to ground under slab along with any voids that may be present. After use, be certain to shut off the valve and press the trigger to relieve any pressure in the hose before removing the tool from the supply hose.

Where To Use

The B&G Sub Slab Injector can be used to apply termiticide beneath slabs, particularly in locations where surfaces are covered with concrete or wood tile. It is also useful for injecting termiticide in confined spaces.

When To Use

Use the B&G Sub Slab Injector when you need to apply termiticide treatment around a home or structure and there is slab in the way preventing a full perimeter treatment.

Safety Information

For safety, remember to not only read the operator manual for the injector but also the full label on the chemical being applied. Be sure to wear the proper PPE (gloves, safety mask, protective eyewear) before mixing and applying termiticide.

Special Considerations

We do not accept returns on equipment or electronics, all sales are final. We do this to ensure that the products we send out are brand new, never opened, and fully operational for our customers to ensure the packages are covered by their respected manufacturer's warranties.