The Inline Strainer Gasket 3/4" is manufactured by Hypro and is an important maintenance part used for the Hypro Inline Strainer 3/4 used as part of pesticide spray rigs. The purpose of the inline strainer is to filter out unwanted debris from the spray hose and the tank for a smooth spray application and to lessen the likelihood of clogs. The gasket is helpful in making sure there are no leaks. Over time, these gaskets can get worn and need replacement. When that time comes, have a Inline Strainer Gasket handy to prevent any faults with your Hypro Inline Strainer.

Tools Needed

To use the Inline Strainer Gasket 3/4" you will need to install it onto the Hypro Inline Strainer on your pesticide spraying rig.

How to Use

• Step 1: Go to your Spraying Rig and detach the Hypro Inline Strainer from the rig system. Twist off the bowl of the Hypro Inline strainer and inside should be the Inline Strainer Gasket. Check its condition and inspect it for any tears or rips.
• Step 2: Pull out the old Inline Strainer Gasket and then slip in the new Inline Strainer Gasket.
• Step 3: Reattach the inline strainer to your pesticide spraying rig system. The strainer hooks up just before the pump. Tighten to ensure that it is secure. Run the spraying rig on to check that the strainer is properly doing its job in filtering out debris.

Where to Use

The Inline Strainer Gasket 3/4" is to be placed inside the bowl of the Hypro Inline Strainer. The Hypro Inline Strainer is located on the connection between the tank and the pump.

When to Use

Replace the Inline strainer gasket when your Hypro Inline strainer is not leaking or not filtering out debris properly.

Safety Information

The Hypro Inline Strainer Gasket 3/4" is safe to install and operate when done so by following the service manual instructions. Use the proper PPE (gloves, long-sleeved clothing) when operating and maintaining the roller pump.

Special Considerations

We also have a 1 inch Inline Strainer Gasket available for the 1 inch Inline Strainer.

*We do not accept returns on equipment or electronics, all sales are final. We do this to ensure that the products we send out are brand new, never opened, and fully operational for our customers to ensure the packages are covered by their respected manufacturer's warranties.