Hose Barb Fitting For Spray Rig
Hose Barb Fitting For Spray Rig
Hose Barb Fitting for Spray Rig is a hose barb component composed of brass material for endurance against product material.
One side of the hose barb possesses a threaded end that goes into the rig's spray gun while the other side has a barb end for the secure connection to hose.
Hose Barb Fitting for Spray Rig is durable replacement part to connect various spray rig hoses and guns together for easier application.
Tools Needed
To install the Hose Barb Fitting for Spray Rig, you will need to use a crescent wrench for a tight connection to the gun and a hose clamp to secure the hose to the barb.
You may also need to purchase teflon tape (plumber's tape) to wrap around the thread end for a waterproof seal.
How to Use
- Step 1: Ensure the electric spray rig pump is turned off and the ball valve is in the closed position.
- Step 2: With your crescent wrench, remove the current hose barb fitting and replace with the new and accurate hose barb fitting size. Tighten with your crescent wrench until it is secure. Crimp the hose to the barb with the hose clamp.
- Step 3: Check all other connections to your electric spray rig pump and gun before turning it back on.
Where to Use
Use Hose Barb Fitting for Spray Rig on various electric spray rig pumps. Make sure to check the hose size to ensure accurate Hose Barb Fitting size is selected.
When to Use
The Hose Barb Fitting For Spray Rig should be used when current hose barb fitting is damaged, worn, or releasing noticeable amounts of product material.
Safety Information
Hose Barb Fitting for Spray Rig is safe to use around children and pets when applied according to the product manual and label instructions. Always wear the appropriate personal protective equipment (PPE) when handling and applying this product.
Keep out of reach of children and pets.
Special Considerations
It is recommended to use teflon tape around the barb's threaded end to ensure a water-tight connection.
*We do not accept returns on equipment or electronics, all sales are final. We do this to ensure that the products we send out are brand new, never opened, and fully operational for our customers to ensure the packages are covered by their respected manufacturer's warranties.
Availability | Online |
Restricted Use | No |
Shipping Restrictions | |
Brand | SOLUTIONS |
Keith's Pro Tips | "For a secure waterproof seal, we recommend using teflon tape or plumbers tape around the thread end of the Hose Barb Fitting." |
Product Drawbacks | Hose Barb Fitting For Spray Rig can potentially release some product material during application. |
Target Pests | N/A |
Application Equipment | Spray Rig |
Application Methods | Installation |
Active Ingredient | N/A |
Product Type | Equipment |
Formulation | Parts/Unit |
Application Rate | Hose Barb Fitting For Spray Rig comes ready to use with no mixing required. |
Shelf Life | Hose Barb Fitting For Spray Rig will last as long as its stored in a dry, clean enclosed location. |
Yield | Hose Barb Fitting For Spray Rig fits one electric spray rig hose and gun. |
Use Sites | Outdoors |
Time to Kill | Hose Barb Fitting For Spray Rig will not eliminate pests on its own, but will secure an immediate connection for spray rig hose and gun for fast knockdown of pests. |
Restricted Use | No |
---|---|
Availability | Online |
Keith's Pro Tip | "For a secure waterproof seal, we recommend using teflon tape or plumbers tape around the thread end of the Hose Barb Fitting." |
Time to Kill | Hose Barb Fitting For Spray Rig will not eliminate pests on its own, but will secure an immediate connection for spray rig hose and gun for fast knockdown of pests. |
Chemical Type | Equipment |
Formulation | Parts/Unit |
Application Methods | Installation |
Product Drawbacks | Hose Barb Fitting For Spray Rig can potentially release some product material during application. |
Active Ingredient | N/A |
Application Equipment | Spray Rig |
Mix Rate | Hose Barb Fitting For Spray Rig comes ready to use with no mixing required. |
Use Sites | Outdoors |
Yield | Hose Barb Fitting For Spray Rig fits one electric spray rig hose and gun. |
Shelf Life | Hose Barb Fitting For Spray Rig will last as long as its stored in a dry, clean enclosed location. |
Children or pets? | No |
Property Characteristics | None |