Halo 30/45 Glueboard, manufactured by Pelsis, is an easy to service 6 pack glueboard that fits perfectly within the Halo 30 and Halo 45 Fly Lights for continued capture of flying pests such as mosquitoes within commercial indoor areas.

This high performance yellow glueboard is designed with an advanced UV stable adhesive to prevent the glueboard from becoming dry for at least a week.

Halo 30/45 Glueboard is a professional mosquito and fly control tool that offers consistent results and fast replacement.

Tools Needed

We recommend using a pair of gloves when installing the Halo 30/45 Glueboard.

How to Use

• Step 1: Make sure the Halo 30 or Halo 45 Fly Light is disconnected from the wall or other power source. Open either the left or right side of the unit, then remove the old glueboard.
• Step 2: Remove the protective release paper from the new Halo 30/45 Glueboard.
• Step 3: Slowly slide the new Halo 30/45 Glueboard into position, until the glueboard ‘drops’ into the locator, indicating it is in the center of the unit.

Where to Use

Halo 30/45 Glueboards can only be used with either the Pelsis Halo 30 Fly Light or the Pelsis Halo 45 Fly Light.

When to Use

Install the new Halo 30/45 Glueboard at least once every month or when glueboards become full with pests.

Safety Information

Halo 30/45 Glueboard is safe to use around children and pets when installed according to the product manual instructions. Always wear the proper personal protective equipment (PPE) when installing this product.

Special Considerations

Halo 30/45 Glueboard measures 15.6" X 12.2".