Bosch HC2088 1/2" X 24" SDS Plus Drill Bit, manufactured by robert bosch, is a first-rate hammer drill bit used to quickly chip through concrete slabs for perimeter termiticide treatments. The 24 inch drill allows for deeper penetration through hard surfaces like concrete slabs or blocks. It moves quickly through the hardest of surfaces due to its 4 grooves which allows for better torsion in concrete.

If you are wanting to perform a home termite treatment, you will need to perform a perimeter barrier around your property. The bosch hc2088 1/2" X 24" sds plus drill bit will easily penetrate the concrete surrounding your home or commercial building.

Tools Needed

To use bosch hc2088 1/2" X 24" sds plus drill bit you will need an sds or sds plus power drill to drill into concrete slab as well as the appropriate termiticide product to inject into the drilled holes.

How to Use

• Step 1: Attach the bosch hc2088 1/2" X 24" sds plus drill bit to a sds plus power drill and drill into concrete slab to access soil underneath for injection. When drilling holes, you should place them about three inches from the residence or commercial building and around 10 to 12 inches apart around the perimeter.
• Step 2: Inject the termiticide treatment into the areas where the hole have been drilled.

Where to Use

Bosch HC2088 1/2" X 24" SDS Plus Drill Bit can be used for deep penetration in concrete slabs to reach termites residing underneath. This bit may be used indoors too, depending on the type of termiticide treatment used.

When to Use

Bosch HC2088 1/2" X 24" SDS Plus Drill Bit should be used during a trench treatment for termite control and for treating concrete slab around the perimeter of your home or commercial building as well.

Safety Information

Always wear the appropriate personal protective equipment (PPE) that protects hands, feet, face, eyes, and mouth when drilling or applying termiticide products. Before application of termiticide, read all of the labels directions.

Special Considerations

Drilling foundations for termite control will require an sds or sds plus power drill and injection application equipment.

It is recommended to have a trained professional to perform termite treatments to reduce the chances of error.