Bosch HC2067 3/8" X 18" SDS Plus Drill Bit, manufactured by robert bosch, is a high-quality hammer drill bit used to quickly penetrate concrete slabs for perimeter treatments. The 18 inch flute allows for deep penetration into concrete slabs or concrete blocks.

The design of the bit has 4 grooves (2 open grooves, 2 close grooves) that allows the bit to reach full depth into hard surfaces and for better torsion.

For home termite treatments, you will need to complete a perimeter barrier around the perimeter of your home or commercial building, including the soil underneath concrete slabs. Bosch HC2067 3/8" X 18" SDS Plus Drill Bit can easily cut holes into the concrete within seconds. After you have drilled your holes insert your selected termiticide treatment.

Tools Needed

To use bosch hc2067 3/8" X 18" sds plus drill bit you will need an sds plus power drill when drilling holes into concrete slabs. An appropriate termiticide product to inject into the drilled holes. Personal protective equipment (PPE) like gloves, mask, goggles (for dust when drilling), and tennis shoes. Measuring tape to measure appropriate distance from home to treatment area.

How to Use

• Step 1: Attach bosch hc2067 3/8" X 18" sds plus drill bit to a sds plus power drill and drill into concrete slab to access soil for injection. When drilling holes, you should place them three inches from your home or commercial building and around ten to twelve inches apart around the perimeter. For inside structures, make sure you are not drilling into electrical wiring. If unsure, contact a trained professional to examine or treat the area before drilling.
• Step 2: Inject the termiticide treatment into the holes that have been drilled.

Where to Use

Bosch HC2067 3/8" X 18" SDS Plus Drill Bit can be used inside or outside your residence or commercial building to deeply penetrate hard surfaces like concrete slabs or blocks. Deep penetration in concrete slabs is ideal to reach termites residing underneath.

When to Use

Use bosch hc2067 3/8" X 18" sds plus drill bit during a trench treatment for termite control outside your home and if there is concrete slab or block that needs to be treated around the perimeter of your home or commercial building.

Safety Information

Always wear the appropriate personal protective equipment (PPE) that will protect your eyes, face, mouth, hands, and feet when drilling, mixing, and applying termiticide treatments. Read and follow all directions on termiticide product label.

Special Considerations

Drilling foundations for termite control will require an sds or sds plus power drill and injection application equipment. For termite treatments, it is always recommended to have a trained professional to reduce any chances of error.