B&G Versagun Valve 400 Series
B&G Versagun Valve 400 Series
The B&G Versagun Valve is manufactured by B&G Equipment and is an essential replacement part for the B&G Versagun Termite Application tool. The Valve is necessary to inject termiticide so that it flows properly through the termite rod and pipe system to the intended treatment area. If your Versagun Valve breaks or is not working properly, replacing with a new Versagun Valve is a must-have.
Tools needed
To use the Versagun Valve, you will need a Versagun 400 Series Termite application tool. You also may need the help of a wrench to loosen or tighten bolts and nuts.
How To Use
- Step 1:Using the manual instructions, remove the Versagun Valve from the entire termite tool assembly.
- Step 2: Attach the replacement Versagun Valve to the termite rod. Tighten with a wrench to ensure it is secure.
- Step 3: Test out the Versagun Valve to make sure it is connected properly and disperses termiticide correctly.
Where to Use
The B&G Versagun Valve can be used for broadcast spraying, injecting termiticide into perimeter soil, and for treating voids and soil beneath concrete slabs.
When to Use
Replace the Versagun Valve when your original Versagun Valve is malfunctioning or is broken.
Safety Information
The Versagun Valve is safe to install when done so according to manual directions. Wear personal protection equipment that protects hands, face, eyes, and mouth when applying the product. Read and follow all the label directions on liquid termiticides before applying.
Special Considerations
The Versagun Valve can be fitted with 5/8 and 7/16 pipes and 1 or 2 gpm tips.
*We do not accept returns on equipment or electronics, all sales are final. We do this to ensure that the products we send out are brand new, never opened, and fully operational for our customers to ensure the packages are covered by their respected manufacturer's warranties.
Availability | Online |
Restricted Use | No |
Shipping Restrictions | No Restrictions |
Brand | B&G |
Keith's Pro Tips | "If you spot a leak at the back of the valve, Loosen the Lock nut (1/4 turn) at the back of the gun – this will re-set the Shutoff stem to the gasket in the tip. If the leak continues, the Packing screw may have to be removed and the packing would need to be replaced." |
Product Drawbacks | Part may wear and tear over time and will need replacement and/or service. |
Target Pests | N/A |
Application Equipment | Termite Tool |
Application Methods | Installation |
Active Ingredient | N/A |
Product Type | Equipment |
Formulation | Parts/Unit |
Application Rate | N/A |
Shelf Life | N/A |
Yield | N/A |
Use Sites | Outdoors |
Time to Kill | N/A |
Comparable Products | B&G Versatool |
Restricted Use | No |
---|---|
Availability | Online |
Keith's Pro Tip | "If you spot a leak at the back of the valve, Loosen the Lock nut (1/4 turn) at the back of the gun – this will re-set the Shutoff stem to the gasket in the tip. If the leak continues, the Packing screw may have to be removed and the packing would need to be replaced." |
Time to Kill | N/A |
Chemical Type | Equipment |
Formulation | Parts/Unit |
Application Methods | Installation |
Product Drawbacks | Part may wear and tear over time and will need replacement and/or service. |
Active Ingredient | N/A |
Application Equipment | Termite Tool |
Mix Rate | N/A |
Use Sites | Outdoors |
Yield | N/A |
Shelf Life | N/A |
Comparable Products | B&G Versatool |
Children or pets? | No |
Property Characteristics | None |