B&G SSI Compression Ring 1/2" is manufactured by B&G Equipment Company and is a replacement part meant for the B&G Sub Slab Injector Termiticide tool. The compression ring is part of the extension assembly on the B&G SSI. If your B&G Sub Slab Injector tool extension pipe connections have been suffering from leaks replacing the compression ring may solve the problem and get your Sub Slab Injector functioning like normal again.

Tools Needed

To use the B&G SSI Compression Ring 1/2", you will need the B&G Sub Slab injector termiticide application tool. You will also need an adjustable wrench.

How to Use

• Step 1: Following the manufacturer instructions for details and using an adjustable wrench, undo the trigger valve assembly and extension connections, making sure to keep all the small nuts, screws and springs in a safe spot.
• Step 2: Remove the old compression ring and check for damage before replacing with the new compression ring. Make sure it is secured tightly between the expansion ring gasket and the stud.
• Step 3: Reassemble the Sub Slab Injector valve assembly, making sure to tighten all parts so they are secure and then test the injector out to make sure it is working properly and there are no issues.

Where to Use

The B&G SSI Compression Ring 1/2" is used primarily for Sub Slab Injector termite application tools. It is part of an extension accessory and is meant to be fitted between the the stud and expansion ring gasket on on valve assembly extension.

When to Use

Replace the B&G SSI Compression Ring 1/2" when your Sub Slab Injector is experiencing a leak in the extension assembly.

Safety Information

The B&G SSI Compression Ring 1/2" is safe to install when applied according to the manual directions. Keep the part out of reach of pets or small children.

Special Considerations

This part is specifically for the Sub Slab Injector Termite application tool. Ensure you have the right part needed before purchasing. We also sell an SSI Compression ring that is 3/4" inch.

We do not accept returns on equipment or electronics, all sales are final. We do this to ensure that the products we send out are brand new, never opened, and fully operational for our customers to ensure the packages are covered by their respected manufacturer's warranties on parts such as the motor, pump, and reel. Components are not covered by a warranty.