B&G Multeejet Crack and Crevice 4-Way Tip (5800-CC)

B&G Multeejet Crack and Crevice 4-Way Tip (5800-CC), manufactured by B&G, is used on the Extenda-Ban Value assembly for the stainless steel sprayers

The B&G Multeejet Crack and Crevice 4-Way Tip are essential to the B&G sprayer wand. It helps to adjust the sprayer to different spray settings, such as fine or coarse fan, 2-pin stream settings, and a setting specifically for spraying in cracks and crevices. The Crack and Crevice 4-Way Tip is located on the tip of the Extenda-Ban Wand in the multijet tip assembly. 

Tools Needed

To use this part, you will need the appropriate B&G Sprayer to replace the part and possibly a pair of pliers or a crescent wrench if the parts are tightly secured.

How to Use

• Step 1: Take the sprayer Multeejet tip assembly apart on the extenda-ban valve wand. You can refer to the repair manual instructions for details on how to do this precisely.
• Step 2: After taking apart the assembly, remove the old tip assembly piece and replace it with the new B&G Multeejet Crack and Crevice 4-Way Tip.
• Step 3: Put your B&G Sprayer back together and test it to ensure it works appropriately and seamlessly changes to the different spray settings.

Where to Use

The B&G Multeejet Crack and Crevice 4-Way Tip (5800-CC) is meant to be used only for replacement on B&G Sprayers with Extenda Ban Valves.

When to Use

Replace the 5850 Tip Assembly when it is damaged or you are experiencing problems changing to the different spray settings.

The frequency of this part change depends on how often you use the sprayer. If it is heavily used, the part wears and tears more quickly. The part should be regularly checked and replaced annually, depending on the usage rate.

Safety Information

B&G Multeejet Crack and Crevice 4-Way Tip (5800-CC) are safe to use around children and pets when installed according to the product manual instructions. Always wear the proper personal protective equipment (PPE) when using this product.

Be sure to drain and clean the sprayer parts properly before performing maintenance.

Keep small items like this tip assembly out of reach of pets and children as they may swallow it.

Special Considerations

Along with the 5850 Tip Assembly, it would be wise to replace all the other small parts on the B&G Sprayer rather than just a single one at one time. Set a maintenance schedule for your sprayer and change out all the parts in one shot to save time and ensure your sprayer returns to normal functioning.

We do not accept returns on equipment or electronics; all sales are final. We do this to ensure that the products we send out are brand new, never opened, and fully operational for our customers and that the packages are covered by their respective manufacturer's warranties.

(Some B&G products may delay shipping due to being Special Order Items and may take 2 to 3 weeks to receive.)