B&G 457 Void Tip 7/16" is a termite treating tip made by B&G Equipment and can be used on the Versatool and Robco tool to treating termites.

This tip can apply liquid termiticide at a rate of 2 gallons per minute and shoots liquid in a straight line. The tip is especially useful when applying termiticides under concrete slabs using a 7/16" pipe. If you're doing a termite barrier treatment and have to drill holes into slab, the 457 void tip comes in handy.

Tools Needed

To use the B&G 457 Void Tip 7/16" you will need either a Versatool or a Robco termite treatment tool. You may also need a wrench to help you tighten the tips onto your termite rods.

How to Use

• Step 1: Following label directions, attach the B&G 457 Void Tip to your Versatool or Robco termite rod.
• Step 2: Apply the termiticide to the void area with the help of the tip for a nice flow of liquid beneath a concrete slab..

Where to Use

The B&G 457 Void Tip 7/16" is best used to attach to a termite rod to get penetration in voids under concrete slab. Use it to aid you in getting a nice through termite treatment barrier.

When to Use

Use the B&G 457 Void Tip 7/16" when you are trenching or treating for termites and need to apply termiticide to a void that may be hard to treat normally and would require a termite rod.

Safety Information

Please have on the proper PPE when treating for termite. Keep the tip out of reach of pets and children as the tip is very small and can be accidentally swallowed

Special Considerations

When looking at tips for your termite, consider tip size, flow rate (gallons per minute) and the flow pattern.