B&G 24" Extension - VE-164
B&G 24" Extension - VE-164
The B&G 24" Extension is manufactured by B&G Equipment and is an official replacement part for B&G Sprayers with Extenda-Ban Valves. At 24 inches long, it is the longest wand B&G has in stock and allows for a convenient extension on hard-to-reach areas. If your B&G Sprayer Extenda-Ban Valve wand is damaged or you would like a longer reach when performing spray applications, this replacement extension wand is a solid accessory.
Tools Needed
To install the B&G 24" Extension, you will need a wrench for disassembling the old extension wand and tightening the new extension wand onto the sprayer.
How to Use
- Step 1: Detach the Valve and Extension from the hose by unscrewing the extension at the front of the valve. The extension can be pulled away from the valve along with the interior steel cable. Squeeze the Trigger to drain all liquid from the valve.
- Step 2: Remove the interior cable by pulling it slowly through the back end of the Extension wand – you cannot pull the cable through the front of the Extension. The threaded end of the cable at the nozzle end is short and easily passes through the curve in the Extension. The end of the cable at the valve end is long and will not pass through the curve. Replace the cable if it is worn or damaged.
- Step 3: Replace the old wand with the new 24-inch Extenda Ban Valve Wand. Re-assemble the Extension by inserting the short end of the cable into the back so that threads are exposed at the nozzle end.
- Step 4: Test out the sprayer to see if the spray liquid comes out of the extension wand properly and at the right pressure.
Where to Use
The B&G 24" Extension is specially designed and should only be used with sprayers manufactured by B&G Equipment. Using it as a replacement valve on other branded sprayers may not work nor will it fit properly.
When to Use
Replace the B&G 24" Extension when your current extension wand on your sprayer is damaged or you would like a wand with greater reach.
Safety Information
The B&G 24" Extension is safe and easy to install when following the sprayer instruction manual. Keep out of reach of children and make sure to wear the proper PPE when using the sprayer to apply pesticides. Make sure not to leave chemicals in the sprayer when not in use and clean the sprayer out regularly.
Special Considerations
There are other B&G Extenda-Ban Valve extension wands available in different sizes such as the 18-inch extension wand and 9-inch extension wand. Check our website for the other options.
*We do not accept returns on equipment or electronics, all sales are final. We do this to ensure that the products we send out are brand new, never opened, and fully operational for our customers to ensure the packages are covered by their respected manufacturer's warranties.
(Some B&G products may delay shipping due to being Special Order Item and may take 2-3 weeks to receive.)
Availability | Online |
Restricted Use | No |
Shipping Restrictions | |
Brand | B&G |
Keith's Pro Tips | "Extension wands are built to last but there are little parts on the tip that will need to be replaced occasionally to ensure the sprayer functions at a high level for a long time. Keep a part replacement schedule and stick to replacing all little parts and pieces at least once a year to keep your sprayer in good shape." |
Product Drawbacks | Parts may wear and tear over time and will need replacement and/or service. This part may need to be replaced every 1 or 2 years depending on use. |
Target Pests | N/A |
Application Equipment | Pump Sprayer |
Application Methods | Installation |
Active Ingredient | N/A |
Product Type | Equipment |
Formulation | Parts/Unit |
Application Rate | N/A |
Shelf Life | N/A |
Yield | N/A |
Time to Kill | N/A |
Comparable Products | B&G 24" Extenda Ban Valve Wand - N424 |
Restricted Use | No |
---|---|
Availability | Online |
Keith's Pro Tip | "Extension wands are built to last but there are little parts on the tip that will need to be replaced occasionally to ensure the sprayer functions at a high level for a long time. Keep a part replacement schedule and stick to replacing all little parts and pieces at least once a year to keep your sprayer in good shape." |
Time to Kill | N/A |
Chemical Type | Equipment |
Formulation | Parts/Unit |
Application Methods | Installation |
Product Drawbacks | Parts may wear and tear over time and will need replacement and/or service. This part may need to be replaced every 1 or 2 years depending on use. |
Active Ingredient | N/A |
Application Equipment | Pump Sprayer |
Mix Rate | N/A |
Yield | N/A |
Shelf Life | N/A |
Comparable Products | B&G 24" Extenda Ban Valve Wand - N424 |
Children or pets? | No |
Property Characteristics | None |