The MistAway 30 inch Copper Riser is a 10 pack of sturdy, thick-walled copper tubing intended for use with a MistAway Automatic Mosquito Misting System. The pipes are machine grooved at each end for easy connections with the other misting systems components. Simply push to connect and you are set.

Tools Needed:

There are no tools necessary to use the copper risers.

How to Use:

• Step 1: Lay out the misting system components roughly where you want them to be around the area.
• Step 2: Push the spray nozzle on one end of the copper tubing and the bypass on the other end of the pipe and lock it into place at the desired location. It should easily push-to-connect
• Step 3: Run the hose to each riser to complete the set up of your misting system.

Where to Use:

This product can be used anywhere you wish to install a mosquito misting system. Make sure to observe proper installation procedures when installing a mosquito misting system.

When to Use:

Use this product when you are installing a mosquito misting system. The amount of risers depends on what type of misting system you have, so be sure to do proper research for your system before installing new outlets.

Safety Information:

Be sure to not damage the copper pit when fitting or installing it, as a crack or leak could expose you nor other to the chemicals being applied. 

Special Considerations:

It is important to plan out where you wish each nozzle to before installing. This will help ensure you have the proper length of hose, and the right number of copper risers for the desired amount of nozzles.