26GT Fungicide, manufactured by Bayer, is a broad-spectrum fungicide that provides excellent control on a large number of turf and ornamental diseases. Once applied, this product continues to prevent disease growth with its long residual rate of 14 days or longer.

Begins to immediately knockdown diseases with complex mycelium structures in as little as 24 hours after application even in extreme heat conditions, resulting in faster turf recovery.

26GT Fungicide offers professional settings trusted preventative and curative fungal control with a quick knockdown rate against diseases such as DMI-resistant dollar spot, snow mold, and large patch.

Tools Needed

26GT Fungicide can be applied with aircraft or mechanical ground equipment (groundboom, airblast, etc.) such as backpack sprayers, handheld pump sprayers, or spray rigs. Chemigation systems such as sprinkler irrigation system may also be used for application.

How to Use

• Step 1: Determine how much 26GT Fungicide to use by measuring the square footage of the treatment area. To do this, measure the length and width of the treatment area in feet then multiply them together (length X width = square footage). To treat greens and tees of golf courses and fairways and other turf areas, use 3-4 oz. of product in 0.5 to 10 gallons of water per 1,000 sq. ft. For all other site sites, use 4-8 oz. of product in 0.5 to 10 gallons of water per 1,000 sq. ft. Do not make more than 6 applications per year or exceed a total of 35 fl. oz. of product per 1,000 sq. ft. per year. To treat ornamental plants as a foliar spray, use 1.0 to 2.5 quarts of product in 100 gallons of water. To treat ornamentals as a drench application, use 13 fl. oz. (1 to 2 pints) of product in 100 gallons of water per square foot. To treat ornamentals as a dip, apply 1.0 to 2.0 quarts of product in 100 gallons of water.
• Step 2: Fill your selected sprayer with half the amount of water, add measured amount of 26GT Fungicide, then pour in the remaining half of water. Close the spray tank lid and shake until the solution has completely dissolved.
• Step 3: Maintain a low spray pressure of the 26GT Fungicide mixed solution to the top and bottom of grass and ornamental leaves until wet, but not to the point of runoff with ground equipment. When performing a drench application, dip the cuttings, corms, and bare root roses until the foliage is completely covered. Dip plants prior to storage, planting, and cold storage. Do not mow or irrigate treated turf until 24 hours have passed after application.

Where to Use

26GT Fungicide may be used on turf on golf courses, sod farms, and institutional areas where fine turf is grown. Field, landscape, and greenhouse ornamentals and conifer nurseries can also be treated.

This product cannot be applied to residential sites or spathiphyllum.

Except for use on golf courses, if applying this product adjacent to a water body such as a lake, reservoir, river, permanent stream, marsh or natural pond, estuary, or commercial fishpond, there must be at least a 25-foot vegetative buffer strip between the water body and the point of application.

When to Use

Apply 26GT Fungicide in the spring, summer, and fall when conditions are favorable for diseases development, but no symptoms are visible for preventative control. For curative control, it may be applied throughout the year when light to moderate infestations are present except during snow.

For golf courses only, do not apply to turf cut higher than 1” on golf holes where water bodies are present.

Safety Information

26GT Fungicide is safe to use around children and pets when applied according to the product label instructions. Always wear the proper personal protective equipment (PPE) when mixing and applying this product.

Do not graze animals on treated turf. Do not feed clippings from treated turf to livestock or poultry.

Keep people and pets out of treated areas until sprays have dried.

Special Considerations

26GT Fungicide cannot be mixed with any sticker, extender, or wetting agent.

This product cannot be used as a drench on impatiens, and pothos.