3M N95 Particulate Face Mask
3M N95 Particulate Face Mask
3M N95 Particulate Face Mask is a lightweight face mask that is approved by the National Institute for Occupational Safety and Health with an N95 rating with at least 95% filtration efficiency against various dust, dirt and other airborne particles for complete work environment protection. Mask model N95-8200.
The 3M N95-8200 Particulate Face Mask, manufactured by 3M, is a low-cost particle mask designed to protect your face and breathing passageways from breathing in any particles and chemicals during pest control procedures or lawn care treatments.
This lightweight and comfortable mask features an adjustable nose clip for a secure fit, nose foam for seal and comfort as well as reducing potential eyewear fogging. Additional, this effective personal protective equipment (PPE) has stapled headbands for security.
3M N95-8200 Particulate Face Mask is a disposable NIOSH approved designed to direct dust, chemicals, and odors away within various open or enclosed environments.
Tools Needed
The 3M N95-8200 Particulate Face comes ready to use and does not need any other tools for usage.
How to Use
- Step 1: Before use, wash your hands thoroughly. Remove the 3M N95-8200 Particulate Face Mask from the packaging.
- Step 2: Thread the straps through the buckles, ensuring they remain untwisted.
- Step 3: Pull the lower strap over your head and position it below your ears. Then pull the upper strap over your head and position it above your ears. Tighten the straps to secure it on your face.
- Step 4: Perform a fit check by covering the respirator with your hands, inhale sharply and you should feel the respirator clasp slightly onto your face.
Where to Use
3M N95-8200 Particulate Face Mask should be used anywhere you are using chemicals for pest control or lawn care. This face mask is also suitable for indoor and outdoor applications such as non-harmful dusts encountered in sanding, sweeping, pollen, mold spores, gardening, raking, mowing, cutting firewood and more.
When to Use
3M N95-8200 Particulate Face Mask should be used whenever you are dealing with chemicals, dusts, liquid mists and non-oil sprays.
Safety Information
3M N95-8200 Particulate Face Mask are safe to use with most regular dust or liquid chemical applications. Before any application, always test all personal protective equipment (PPE) to ensure a snug and comfortable fit.
Dispose and replace this mask after use or if it becomes dirty.
Keep out of reach of children and pets.
Special Considerations
3M N95-8200 Particulate Face Mask is a disposable mask and is not recommended to be reused.
No natural rubber latex is used in this mask.
Availability | Online |
Restricted Use | No |
Shipping Restrictions | |
Brand | 3M |
Keith's Pro Tips | "A particle mask is one of the bare minimum pieces of PPE gear you should wear before a pest control job. Make sure that when you put it on that you have it on snug but not too tight where it feels uncomfortable." |
Product Drawbacks | 3M N95-8200 Particulate Face Mask is not a sufficient mask for protecting against gases and vapors, oil aerosols, asbestos, arsenic, cadmium, lead, 4,4-methylene dianiline (MDA), or abrasive blasting |
Target Pests | N/A |
Application Equipment | None Needed |
Application Methods | Aerosol Spray, Automatic Misting, Broadcast Spray, Crack & Crevice, Granular Spreading, Spot Treatment, Thermal Fogging, ULV Space Spray |
Active Ingredient | N/A |
Product Type | Equipment |
Formulation | PPE |
Application Rate | 3M N95-8200 Particulate Face Mask comes ready to use. Use one 3M Particulate Face Mask per person. |
Shelf Life | 3M N95-8200 Particulate Face Mask will not expire. |
Yield | 3M N95-8200 Particulate Face Mask fits one person. |
Use Sites | Indoors, Outdoors |
Time to Kill | 3M N95-8200 Particulate Face Mask immediately protects the person, but will not repel gases and vapors, oil aerosols, asbestos, arsenic, cadmium, lead, 4,4-methylene dianiline (MDA), or abrasive blasting |
Comparable Products | 3M Half Facepiece Reusable Respirator 7500 Series |
EPA Registration # | N/A |
Restricted Use | No |
---|---|
Availability | Online |
Keith's Pro Tip | "A particle mask is one of the bare minimum pieces of PPE gear you should wear before a pest control job. Make sure that when you put it on that you have it on snug but not too tight where it feels uncomfortable." |
Time to Kill | 3M N95-8200 Particulate Face Mask immediately protects the person, but will not repel gases and vapors, oil aerosols, asbestos, arsenic, cadmium, lead, 4,4-methylene dianiline (MDA), or abrasive blasting |
Chemical Type | Equipment |
Formulation | PPE |
Application Methods | Aerosol Spray, Automatic Misting, Broadcast Spray, Crack & Crevice, Granular Spreading, Spot Treatment, Thermal Fogging, ULV Space Spray |
Product Drawbacks | 3M N95-8200 Particulate Face Mask is not a sufficient mask for protecting against gases and vapors, oil aerosols, asbestos, arsenic, cadmium, lead, 4,4-methylene dianiline (MDA), or abrasive blasting |
Active Ingredient | N/A |
Application Equipment | None Needed |
Mix Rate | 3M N95-8200 Particulate Face Mask comes ready to use. Use one 3M Particulate Face Mask per person. |
Use Sites | Indoors, Outdoors |
Yield | 3M N95-8200 Particulate Face Mask fits one person. |
EPA Registration No. | N/A |
Shelf Life | 3M N95-8200 Particulate Face Mask will not expire. |
Comparable Products | 3M Half Facepiece Reusable Respirator 7500 Series |
Children or pets? | No |
Property Characteristics | None |
-
Q:Is this mask reusable or disposable? Also, are they purchased as a single item or in a box with multiple masks?7/15/17A:It is sold in a single unit and they are a disposable mask we do sell reusable with extra cartridges. https://www.solutionsstores.com/3m-full-facepiece-reusable-respirator-7800s-m
Pest specialist
7/17/17Certified Buyer