VC-152 Valve Cable 9", manufactured by B&G, is specifically sold for use as a replacement part for B&G sprayers.

The valve cable is an important part of the sprayer as it helps to transport the fluid from the tank to the sprayer tip so it can be distributed and sprayer properly.

Valve cables experience wear and tear over time and should be replaced periodically to keep the sprayer performing at a high level.

Tools Needed

To use this part, you will need the appropriate B&G Sprayer to replace the part on and possibly a pair of pliers or a crescent wrench if the parts are tightly secured.

How to Use

• Step 1: Following the instructions in the repair manual, detach the valve and extension from the hose and undo the packing.
• Step 2: Remove the stainless steel cable by pulling it back slowly through the back end of the extension. The threaded end of the cable at the nozzle end is short and easily passes through the curve in the Extension. The end of the cable at the valve end is long and will not pass through the curve. Replace the cable if it is worn or damaged.
• Step 3: Re-assemble the Extension by inserting the short end of the cable into the back so that threads are exposed at the nozzle end.

Where to Use

The VC-152 Valve Cable 9" is meant to be used only for replacement on a B&G handpump sprayer such as the N124 and similar models. There are other models it can also fit. Make sure the extension is the right size for the cable.

When to Use

Replace the valve cable when it has been damaged or you are experiencing leaks or any other reduction in spray quality. How often this part is changed depends on how often you use the sprayer. If it is heavily used, the part wears and tears quicker. Typically at minimum we suggest changing it out annually.

Safety Information

VC-152 Valve Cable 9" is safe to use around children and pets when applied according to the product label instructions. Always wear the appropriate personal protective equipment (PPE) when handling and applying this product. 

Be sure to properly drain and clean the sprayer parts before performing maintenance.

Keep out of reach of pets and children.

Special Considerations

Along with the valve cable, check to see if any other small parts on the B&G Sprayer need replacing such as the valve packing. Set a maintenance schedule for your sprayer and change out all the parts in one shot to save time so your B&G sprayer can be ready to use.