The Straight Slimline Tip is a replacement part manufactured by Mistaway and is designed to connect multiple pieces of tubing lines to spray mosquito control products around various outdoor areas. This nozzle tip requires 1/4" push to connect fitting to allow the nozzle If your misting nozzles have been clogged or are not functioning well, use this pack of nozzles to replace them and keep the system performing at a high level.

Tools Needed

To install MistAway Slimline Tips, you will need a tubing cutter, screw gun, clamps, and screws (the type of screw needed depends on where the tubing line is run).

How to Use

• Step 1: Measure the length of tubing needed and locate the area the Slimline Tip will be placed. It is suggested to place a nozzle approximately every 20 feet.
• Step 2: Use the tubing cutter to cut the tubing in the exact area where the tee nozzle will be fitted.
• Step 3: Put a clamp around the tubing close to the nozzle and screw it to the surface area to secure the nozzle in place.
• Step 4: Make sure there are no leaks between connecting the Slimline Nozzle to the tubing and adjust the nozzle to spray in the desired direction.

Where to Use

MistAway Slimline Tips can be fitted anywhere along the tubing line in between the beginning of the line and the end of the line. For best results, place nozzles every 10 to 20 feet around the entire perimeter of the building, house, or yard. MistAway Slimline Tips are great to place under the eaves of roofs, along fences, around patios, porches, covered walkways, detached garages, and more. It can be applied to any outdoor system with correct size tubing around residential areas, businesses, and recreational locations. They can also be installed in areas on the ground around gardens, driveways, or sidewalks by using risers.

When to Use

The MistAway Slimline Tips is great to use when outdoor areas have multiple angles that need mosquito control.

Safety Information

MistAway Slimline Tips are safe to use around humans and pets. Be sure to adjust the nozzle so that mosquito control products are not being sprayed directly people or pets.

Special Considerations

Uniion tees or Union elbows and adapters are required to complete the nozzle.

*Please note that we do not accept returns for Equipment such as any type of Sprayers, Parts, Electronics, Hoses, Box Spring Covers, Mattress Covers, or Pillow Covers due to the nature of these products. (These products do have a Manufacturer’s Warranty. You will have to contact the manufacturer if there is an issue with the product).