Shurflo 8000 Series Diaphragm Pump
Shurflo 8000 Series Diaphragm Pump
Shurflo 8000 Series Diaphragm Pump is a powerful and long lasting diaphragm pump designed for heavy duty spray rigs and other equipment applications desiring 1.8 gallons per minute. Model no. 8000-547-189.
The Shurflo 8000 Series Diaphragm Pump, manufactured by Shurflo, is an on-demand diaphragm pump for professional spray rigs, boats, RVs and more. It is quiet while handling heavy-duty jobs such as agricultural spraying and transfer applications.
Designed for long-lasting spraying and fluid transer to support applications within various environments, including agriculture. This unique structure contains spherically shaped valves and automatic demand switch, which allow for dependable high flow rates and maximum discharge up to 1.8 GPM (6.8 l/min) and pressures of 150 PSI.
The 8000 Series Diaphragm Pump is powerful by a (separate) 12 Volt power supply and is self priming for up to 8 feet, and can be mounted in any position. It additionally is designed in a chemical resistant material increasing its overall durability.
Tools Needed
The 8000 Series Diaphragm Pump would need to be installed onto a spraying rig to work. Follow the documentation and manual that comes with the Shurflo Pump for details on how to do this and what specific tools are needed.
How to Use
- Step 1: Following the instruction manual, remove existing pump and pump wiring from skid sprayer unit. Once removed, attach the 8000 Series Diaphragm Pump to your skid sprayer unit. To prevent electrical shock, disconnect power before imitating any work.
- Step 2: You will not need to prime the 8000 Series Diaphragm Pump since all 8000 series of pumps are self-priming. The 8000 Series Diaphragm Pump can be mounted in any position. For best results, mount in an area that is dry, and provides adequate ventilation. Mount the Shurflo 8000 Pump in the down position to avoid any possible leakage into the motor. Secure the rubber feet with 8" hardware.
- Step 3: Connect tubing that is at least 3/8" or 1/2" (10 or 13 mm) and at least 18 in. (46 cm) in length to 8000 Series Diaphragm Pump. Avoid using unncessarily long tubing to avoid sharp bends that may kink or clog over time. It is recommended to install a 50-mesh strainer to prevent foreign debris.
- Step 4: Test out the product to make sure it is running well and ensure it is ready to perform.
Where to Use
The 8000 Series Diaphragm Pump is an important component of a custom skid sprayer for large heavy-duty spraying applications.
When to Use
Install the 8000 Series Diaphragm Pump when you are looking to upgrade a skid sprayer or needing to replace a worn, old diaphragm pump.
Safety Information
8000 Series Diaphragm Pump is safe to use around children and pets when applied according to the product manual instructions. Always wear the proper personal protective equipment (PPE) when handling and applying this product.
Keep out of reach of pets and children.
Special Considerations
Contact our custom spray rig experts who can give you helpful advice and recommendations on the 8000 Series Diaphragm Pump and whether it is the best option for your operation.
Availability | Online |
Restricted Use | No |
Shipping Restrictions | |
Brand | SHURFLO |
Keith's Pro Tips | "The 8000 Series Diaphragm Pump is a necessary item to make your spraying rig spray at a high level. Make sure you follow the instructions closely to install the pump correctly." |
Product Drawbacks | 8000 Series Diaphragm Pump does not come with its own power source. A separate 12 volt battery will be needed. |
Target Pests | N/A |
Application Equipment | Spray Rig |
Application Methods | Installation |
Active Ingredient | N/A |
Product Type | Equipment |
Formulation | Parts/Unit |
Application Rate | N/A |
Shelf Life | 8000 Series Diaphragm Pump will last years when maintained properly. |
Yield | The 8000 Series Diaphragm Pump can output up to 1.8 gpm at 107 psi. |
Use Sites | Outdoors |
Time to Kill | 8000 Series Diaphragm Pump will work instantly when properly installed. |
Comparable Products | Hypro Diaphragm Pump |
Restricted Use | No |
---|---|
Availability | Online |
Signal Word | CAUTION |
Keith's Pro Tip | "The 8000 Series Diaphragm Pump is a necessary item to make your spraying rig spray at a high level. Make sure you follow the instructions closely to install the pump correctly." |
Time to Kill | 8000 Series Diaphragm Pump will work instantly when properly installed. |
Chemical Type | Equipment |
Formulation | Parts/Unit |
Application Methods | Installation |
Product Drawbacks | 8000 Series Diaphragm Pump does not come with its own power source. A separate 12 volt battery will be needed. |
Active Ingredient | N/A |
Application Equipment | Spray Rig |
Mix Rate | N/A |
Use Sites | Outdoors |
Yield | The 8000 Series Diaphragm Pump can output up to 1.8 gpm at 107 psi. |
Shelf Life | 8000 Series Diaphragm Pump will last years when maintained properly. |
Comparable Products | Hypro Diaphragm Pump |
Children or pets? | No |
Property Characteristics | None |
-
Q:Can I replace a Shurflo diaphragm pump model number 8000-912-288 with another 8000 series, but a different number?4/29/24A:It depends on the type of pump your swapping it with. What model are you wanting to swap it with?
Amanda
4/30/24 -
Q:is it model number 8000-543-238 ?9/6/21A:This is model # 8000-547-189
Amanda
4/29/24