Revive Enahncer by SePro is a packet of specially blended bacteria and natural enzymes that attack and eliminate organic sediment around a body of water. This product can be used in ponds and streams and even small lakes to improve the appearance of the body of water naturally.

Tools Needed

This product comes pre-mixed in read to apply packets. Just wear proper personal protective equipment (PPE) when applying.

How to Use

• Step 1: Measure the area of the body of water you plan to apply to. Refer to the label for the formula on how to convert those measurements and this will decide how much product needs to be used. Typically, you will use 6 packets per acre-foot.
• Step 2: Apply the required amount of packets to the shallow areas of the water. The packets will dissolve and the bacteria will naturally move around in the water.
• Step 3: Reapply as needed, the label states to reapply with 2 packets per acre foot every 2 weeks to maintain control.

Where to Use

You can apply these packets to almost any body of water, or slow moving stream. If the water is fast moving then the product can be less effective as the bacteria will be washed away.

When to Use

You can apply Revive during the initial stages of sedimentary growth, or during an active infestation. Be sure to follow label instructions for the current status of the body of water you are applying to.

Safety Information

Always wear proper personal protective equipment when handling and applying this product. Revive is safe for aquatic life, but over application may be harmful, or detrimental to the waters natural ecosystem.

Special Considerations

Revive treats the cause of the water sludge and odor, not the symptoms. It may take some time after treatment for these symptoms to dissipate, as the bacterial will be eating away at the offending organic waste.