This product is made for the 3M AGP respirator. These replacement cartridges are easy to replace and use, and should be replaced regularly to protect the user from harmful vapors and contaminants during workplace applications.

3M is a leading brand and offers efficient and easy protection from workplace inhalation hazards. These cartridges are NIOSH approved when used with a NIOSH approved face piece, which is not included.

Tools Needed:

This product does not require additional tools to replace. These cartridges are made for the AGP100 model face piece and may not function properly in other respirators.

How to Use:

• Step 1: Hold the respirator and rotate the cartridges counter clockwise to loosen and remove them from the face piece.
• Step 2: Place the new cartridges into the slots on the face piece and rotate them clockwise to tighten them in place.
• Step 3: Put the respirator on and breathe regularly to test for any leaks or bad seals before using.

Where to Use:

Use for workplace and occupational applications where harmful fumes, aerosols, mold, or other inhalation hazards are present.

When to Use:

You should replace your cartridges when the current one becomes damaged, contaminated, or it becomes difficult to breathe. A good recommendation is to replace them after 40 hours of use or every 30 days.

Safety Information:

There are different filters that absorb different harmful vapors or chemicals, so it is important to make sure you are using the correct filters to protect yourself.

Special Considerations:

These filters have designed expiration dates since they are treated with certain absorbent chemicals that will become less useful over time even if they aren't in use. Be sure to check the expiration dates before installing a new pair.