The Pumptec 350U Pump Set, manufactured by Pumptec, is an electric motor powered pump designed for delivering low-pressure sprayings on a professional pesticide spray rig for large volume pesticide applications.

This easy to use pump features a 3.0 GPM flow rate, an inline strainer, is driven by a 12V battery and carries a strong 150 PSI of pressure. The Pump also has a pressure regulator to keep track of the pressure going to the tank for agitation or going to the hose reel.

The Pumptec 350U Pump Set is environmentally safe and is a popular part of our custom professional spray rigs. This efficiency produces up to 20% more pressure or flow than other competitive pumps. The component parts of the pump are covered by their manufacturer with a 1-year parts warranty and a 100% guarantee (excluding plumbing).

Tools Needed

You will need general tools to install the Pumptec 350U Pump set to an existing pesticide spraying rig.

How to Use

• Step 1: The electric pump must be connected to a 12-volt battery, usually the same battery of the vehicle the rig is mounted on.
• Step 2: Before turning on the pump, make sure that the valve attached to the hose leading from the tank is open. Then set the pressure valve to the open position so that it will send pressure back to the tank for agitation. The pressure regulator can be turned to change the pressure output, but we have it set to the recommended setting of 150 psi. You can turn the pressure regulator valve clockwise or counterclockwise to increase or decrease desired pressure.
• Step 3: Pull the start button to start the pump and allow the product in the tank to circulate. When you are ready to spray, close the pressure valve to send flow to your spray hose.
• Step 4: When you are finished spraying, close the pressure valve to cease flow to the hose. Then turn off the rig. You may leave the valve leading to the tank in the open position, but we recommend closing when driving the vehicle that holds the rig, such as moving from job to job, so that product does not spill back into the pump.

Where to Use

The Pumptec 350U Pump Set can be used as part of a professional spray rig to spray at a low-pressure for applications to landscapes, trees, residential or commercial perimeters, turf, and lawns.

When to Use

The Pumptec 350U Pump Set should be used when your existing pump has malfunctioned and needs replacement or to upgrade over an older pump.

Safety Information

The Pumptec 350U Pump Set is safe to use when installed and operated according to the product manual.

Special Considerations

We do not accept returns on equipment or electronics, all sales are final. We do this to ensure that the products we send out are brand new, never opened, and fully operational for our customers to ensure the packages are covered by their respected manufacturer's warranties on parts such as the motor, pump, and reel. Components are not covered by a warranty.