OS-297 Siphon Tube (22025700)
OS-297 Siphon Tube (22025700)
OS-297 Siphon Tube (22025700) by B&G Equipment Company is specifically sold for use as a replacement part for B&G sprayers. If you have a clogged sprayer which isn't spraying right, it may be that the Siphon tube has a hole or is cracked. Replacing it can get your Sprayer back up and running.
Tools Needed
To use this part, you will need the appropriate B&G Sprayer to replace the part on and a custom wrench.
How to Use
- Step 1: Following the directions that come with your sprayer on replacing parts, go to the section on replacing the Siphon Tube and follow the directions in removing the old Siphon Tube.
- Step 2: After removing the old siphon tube, input the new syphon tube and secure it, making sure to follow the instructions closely on how to do so.
- Step 3: Put your B&G Sprayer back together and you are set.
Where to Use
This product is meant to be used only to replace on a B&G handpump sprayer.
When to Use
Replace the siphon tube when it has been damaged or you are experiencing a sprayer clog.
Safety Information
The product is safe to use when applied according to the label directions. Keep out of reach of pets or small children.
Special Considerations
After installing the siphon tube, pressure check it to make sure that this solves your sprayer clog issue. If it doesn't it may be another part that needs replacement.
Availability | Online |
Restricted Use | No |
Shipping Restrictions | |
Brand | B&G |
Keith's Pro Tips | "The Siphon tube is usually the first part to replace if your B&G Sprayer is experiencing a clog or blockage when spraying. Replacing this should allow the spraying liquid to flow freely. If not, it may be another part that is the problem." |
Application Equipment | Pump Sprayer |
Application Methods | Installation |
Active Ingredient | N/A |
Product Type | Equipment |
Formulation | Parts/Unit |
Application Rate | N/A |
Shelf Life | N/A |
Yield | N/A |
Use Sites | Indoors, Outdoors |
Time to Kill | N/A |
Comparable Products | TS-297 Siphon Tube for 2 Gal. Sprayer |
Restricted Use | No |
---|---|
Availability | Online |
Keith's Pro Tip | "The Siphon tube is usually the first part to replace if your B&G Sprayer is experiencing a clog or blockage when spraying. Replacing this should allow the spraying liquid to flow freely. If not, it may be another part that is the problem." |
Time to Kill | N/A |
Chemical Type | Equipment |
Formulation | Parts/Unit |
Application Methods | Installation |
Active Ingredient | N/A |
Application Equipment | Pump Sprayer |
Mix Rate | N/A |
Use Sites | Indoors, Outdoors |
Yield | N/A |
Shelf Life | N/A |
Comparable Products | TS-297 Siphon Tube for 2 Gal. Sprayer |
Children or pets? | No |
Property Characteristics | None |