Nylon Clamp 1/4" are manufactured by MistAway and are a package of black clamps meant for the MistAway Automatic Mosquito Misting System. These clamps are used to hold and secure tubing where mounted so your tubing line set up appears neat and professional. The clamps comes in a pack of 100 so you have plenty to work with for your tubing run.

Tools Needed

To use the 1/4" Nylon Clamps you will need a Phillips Screwdriver and some screws to hold and secure the tubing.

How to Use

• Step 1: When creating a misting circuit, use tubing clamps to secure tubing around nozzles to keep them from moving or loosening.
• Step 2: Use a screwdriver to tightly close down on tubing so it doesn't budge budge.
• Step 3: Continue to apply the clamps around your misting circuit and tube runs until your system is fully connected.

Where to Use

The MistAway 1/4" Nylon clamps can be used around where you have set up an outdoor mosquito misting system for convenient mosquito control.

When to Use

Use MistAway Nylon Clamps when setting up a MistAway mosquito misting system around a structure or when you need to replace or repair worn clamps on an established MistAway system.

Safety Information

These Mistaway Clamps are safe to use when installed according to label directions. Keep pets and children away from unused tubing as they can damage it or choke on the clamps.

Special Considerations

We also carry Nylon clamps in 3/8" size and with a natural cream colored tone for blending in with light colored scenery.