Transchem Muriatic Acid, manufactured by Transchem, is a excellent brick cleaner that lowers total alkalinity and pH to remove organic debris around residential and commercial structures.

This easy to use product provides an unsurpassed appearance of concrete and brick surfaces that all viewers are bound to notice.

Transchem Muriatic Acid gives the brighter and well-cared for appearance of homes and businesses with one simple treatment.

Tools Needed

To apply Transchem Muriatic Acid, you will need to mix the product in an open-plastic top container. Then apply it with a plastic bristle scrub brush.

How to Use

• Step 1: Remove all surface oil, grease and dirt before using Transchem Muriatic Acid. Apply 1/2 pint of Transchem Muriatic Acid per gallon of water to brighten concrete and masonry surfaces. To etch concrete, use 1 pint of product per gallon of water.
• Step 2: Mix the Transchem Muriatic Acid solution in an open-plastic top container. Add the proper amount of water into the container first then slowly pour in the measured amount of Transchem Muriatic Acid. Stir the water and product gently together until mixed. Stir only with plastic or bare wood.
• Step 3: Apply the Transchem Muriatic Acid mixture to the exterior brick layer then allow it to remain on treated surfaces for 5 minutes. After this time has passed, water it off with plenty of water. Allow surface to dry.

Where to Use

Transchem Muriatic Acid can be used on exterior concrete, brick, and masonry surfaces.

For exterior use only.

When to Use

Use Transchem Muriatic Acid when you need to etch concrete, brighten concrete and masonry, or remove excess mortar from brick.

Safety Information

Transchem Muriatic Acid is safe to use around children and pets when applied according to the product label instructions. Always wear the proper personal protective equipment (PPE) when applying this product.

Special Considerations

Do not mix Transchem Muriatic Acid with chlorine-type bleaches or any other chemical or household products.