• Call (800) 479-6583
  • Mon-Fri 8am-5pm
  • |
  • Sat 9am-5pm

MistAway Zone Kit Gen III

Free Shipping on All Orders

You can double the nozzles your MistAway Gen III+ mosquito control system will support with this additional zone kit. Your system will be able to support TWO misting zones of 55-65 nozzles each. Part Number 20073

Target Pests


For Use In

Mistaway Mosquito Misting Systems


Both zones may be set to the same mist schedule or to different schedules. Both zones may be set to the same mist schedule or to different schedules.Remote control may be set to operate both or either of the zones.

How To

1. Disconnect Power to the Unit. The Zone Kit will be recognized when the controller boots up after the Zone Kit is connected.

Pictured: Gen 3 Zone Kit, mounting screws and length of 1/4" tubing.

2. Remove the black plastic plug from access port and push Zone Kit connector and lead through port.


3. Use screws (4 included) to mount Zone Kit to back of unit.

4. Connect 1/4" tubing from misting unit to port labeled "IN" on the Zone Kit. Connect 1/4" tubing feeding each nozzle circuit to the ports labeled "Zone 1" and "Zone 2."

5. Lift controller from shroud and connect the lead from the Zone Kit to the 4-pin connector labeled "ZONE CONTROL." Replace controller.

6. Restore power to the unit.

7. Set the number of nozzles per zone.
SET-UP Menu, NZ1 and NZ2
If you see only NOZ, verify Zone Kit connector is plugged into ZONE CONTROL port on controller and cycle the power.

8. Set the remote zone control.
RMZ1: remote mist in Zone 1 only
RMZ2: remote mist in Zone 2 only
RMZ 1/2: remote mist in Zone 1, then in Zone 2

9. Set the automatic mist zones.
if ZNC = BTH, both zones will mist on same schedule with the same mist duration. In the CYCLES Menu, you can configure schedule and duration for each of 24 mist cycles, C1 - C24.

If ZNC = IND, each zone can operate on its own schedule. In the CYCLES Menu, you configure Zone 1 schedule and duration in 12 possible mist cycles, A1 - A12. You configure Zone 2 schedule and duration in cycles B1 - B12.
You'll find B1 sequentially after A12 in the CYCLES Menu.

10. Run an inspection cycle on each zone.
INS1 for Zone 1 and INS2 for Zone 2. Press and hold Green ► button for 5 seconds to start.

MistAway Zone Kit Gen III

Product Q & A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 4 questions Browse 4 questions and 4 answers
Will this help me add more nozzles to my system?

I have 60 and need to add another 35 to a side part of my yard that is being turned into a play area?
Scott on May 24, 2017
BEST ANSWER: Yes, this would be perfect for your scenario.
Is the remote sold separately or does it come with this?
clay on May 26, 2017
BEST ANSWER: The remote would not be included with this unit but we do sell it separate.
What do I need outside of this item to have a complete expansion of my existing misting system set up?
Jeff on May 25, 2017
BEST ANSWER: You will still need the additional tubing, unions and nozzles.
So how many nozzles will I have total if I add this to my system?
Stan on May 24, 2017
BEST ANSWER: You can go up as high as 120 nozzles on the system with a MistAway Zon Kit.

Customer Reviews

5.0 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
expand my mistaway
This allows me to cover even more of my yard, and I have a huge yard!
May 26, 2017
Very Satisfied!
We made a move recently into a bigger home with a larger yard and so we needed to cover more ground with our Misting System. Coupled this item here with some more tubing and nozzles and viola, our property is completely covered and mosquitoes know not to hang around.
May 25, 2017
Easy to Install
I was a little concerned that it was as easy as they made it sound to add the zon kit for the Mistaway Gen III, but they were right took very little effort. Was able to add extra 60 nozzles in a weekend!
May 24, 2017
Very happy with this zone kit! Adding extra nozzles to it helped so much.
May 24, 2017

Contact Us