Straight Union Coupling 1/4"

The Union Coupling 1/4 inch is designed to connect two sections (in this case, 1/4" tubing) of tubing in a straight line.

This coupling is useful when creating a long run. It is also commonly used to repair holes or damaged spots in the tubing so your circuit works properly and doesn't waste a misting solution.

Tools Needed

For best results when installing Union Coupling, you will need a tubing cutter, screw gun, clamps, and screws (the type of screw needed depends on where the tubing line is run).

How to Use

• Step 1: Measure the length of tubing needed and locate the area where the Union Coupling will be placed to a second section of tubing along the run.
• Step 2: Use the union coupling to join the two tubing sections and press them together until they are tightly secured.
• Step 3: Make no leaks between the two tubing sections.

Where to Use

Union Couple 1/4" fittings can be fitted anywhere along the tubing line between the beginning and end. They are primarily used to extend a misting line around residential areas, businesses, and recreational locations.

When to Use

The Union Couple should be used when you need to repair a damaged tubing line with a rip or a hole or when you want to create a long run in your misting circuit.

Safety Information

Straight Union Coupling 1/4" is safe for use if applied according to the product manual instructions. Always wear the proper personal protective equipment (PPE) when installing this product.

Keep out of reach of children and pets.

Special Considerations

The locking mechanism used to connect the coupling can sometimes get stuck. You might have to periodically clean and maintain it to make sure it doesn't get debris in it.