Mistaway (C) EFA - Remote Receiver
Mistaway (C) EFA - Remote Receiver

Mistaway (C) EFA - Remote Receiver

MISTAWAY

Mistaway (C) EFA - Remote Receiver

The Remote Receiver is an essential item which ensures that your Mosquito Misting System remote control sends operating signals to the misting system itself so it performs it's functioning properly. The following receiver works the older EFA units MistAway Misting System.
As low as $169.99
Only %1 left
SKU
EFA - Remote Receiver Product Page
Min : 169.99 - Max : 169.99
+ -

The EFA Remote Receiver, manufactured by Mistaway, is a vital part of a MistAway Automatic Mosquito Misting System because it allows the remote control to send signals to the misting unit so it can perform the functions selected.

A remote receiver may malfunction if there is water entering the connection with the receiver cable or on the receiver itself. This replacement receiver is made for the old EFA versions of MistAway mosquito misting systems.

Replacing the remote receiver is easy to do and will get your misting system back to performing like it should.

Tools Needed

To install the Remote Receiver all you will need is a Phillips screwdriver.

How to Use

  • Step 1: Before installing, please first disconnect the power to the unit.
  • Step 2: Using the screwdriver, remove the controller and reposition the plastic cover to gain access to the inside of the unit.
  • Step 3: When you have accessed the control panel, carefully pull the blue wire of the old remote receiver and remove it then replace with the new remote receiver.
  • Step 4: Conduct a test to orient the remote transmitter to the new receiver and if it is working properly, reassemble the unit.

Where to Use

The remote receiver is located on the back of the Human Interface Board, inside the Control Panel.

When to Use

Replace the Remote Receiver on your EFA MistAway system when the system is not picking up signals from your remote transmitter and is faulty, possibly due to water damage.

Safety Information

The remote receiver safe and easy to install when installed according to MistAway's directions.

Special Considerations

When replacing the remote receiver, we advise also replacing the receiver cable and antenna.

AvailabilityOnline
Restricted UseNo
BrandMISTAWAY
Keith's Pro Tips"Make sure you are purchasing the right remote receiver for your MistAway unit. This one is specifically for the first generation older MistAway systems. The newer versions are not compatible."
Product DrawbacksMistaway (C) EFA - Remote Receiver will become ineffective when wet.
Target PestsMosquitoes
Application EquipmentMisting System
Application MethodsAutomatic Misting
Active IngredientN/A
Product TypeEquipment
FormulationParts/Unit
Application RateMistaway (C) EFA - Remote Receiver is ready to use and requires no mixing.
Shelf LifeMistaway (C) EFA - Remote Receiver will last up to 2 years in storage when kept dry, and clean.
YieldMistaway (C) EFA - Remote Receiver will replace one remote control.
Use SitesOutdoors
Time to KillMistaway (C) EFA - Remote Receiver does not eliminate pests.
More Information
Restricted Use No
Availability Online
Keith's Pro Tip "Make sure you are purchasing the right remote receiver for your MistAway unit. This one is specifically for the first generation older MistAway systems. The newer versions are not compatible."
Time to Kill Mistaway (C) EFA - Remote Receiver does not eliminate pests.
Chemical Type Equipment
Formulation Parts/Unit
Application Methods Automatic Misting
Product Drawbacks Mistaway (C) EFA - Remote Receiver will become ineffective when wet.
Active Ingredient N/A
Application Equipment Misting System
Mix Rate Mistaway (C) EFA - Remote Receiver is ready to use and requires no mixing.
Use Sites Outdoors
Yield Mistaway (C) EFA - Remote Receiver will replace one remote control.
Shelf Life Mistaway (C) EFA - Remote Receiver will last up to 2 years in storage when kept dry, and clean.
Children or pets? No
Property Characteristics None
Questions and Answers
  1. Q:Do you have a control board for a mistaway system gen 1.2.2 ?
    10/7/17
    A:No sorry, those are no longer available and require an upgrade. https://www.solutionsstores.com/gen-1-2-upgrade-kit-to-gen-1-3-w-agitator-system

    Camille Landry

    10/9/17
    Certified Buyer
  2. Q:Will this part, 10910 remote receiver, fit a Gen 1.2 control board? Does it require soldering to install or is it plug and play? Thanks.
    9/9/17
    A:No you will need the other receiver part SKU: 10903. https://www.solutionsstores.com/c-gen-1-3-3-remote-receiver

    Camille Landry

    9/11/17
    Certified Buyer
© 2024 Solutions Pest & Lawn. All Rights Reserved