15 Inch Copper Riser (10 Pk)

The 15 inch Copper Riser is a sturdy, thick-walled copper piper intended for use with a mosquito misting system. The pipes are machine notched at each end for easy connections with the other misting systems components.

Tools Needed:

There are no tools necessary to use the copper risers.

How to Use:

• Step 1: Lay out the misting system components roughly where you want them to be around the area.
• Step 2: Push the spray nozzle on one end of the copper pipe, and the bypess on the other end of the pipe and lock it into place at the desired location.
• Step 3: Run the hose to each riser to complete the set up of your misting system.

Where to Use:

This product can be used anywhere you wish to install a mosquito misting system. Make sure to observe proper installation procedures when installing a mosquito misting system.

When to Use:

Use this product when you are installing a mosquito misting system. The amount of outlets depends on what type of misting system you have, so be sure to do proper research for your system before installing new outlets.

Safety Information:

Be sure to not damage the copper pit when fitting or installing it, as a crack or leak could expose you nor other to the chemicals being applied. 

Special Considerations:

It is important to plan out where you wish each nozzle to before installing. This will help ensure you have the proper length of hose, and the right number of copper pipes for the desired amount of nozzles.