Martin's Mosquito Pro RTS, manufactured by CSI, is an excellent fast-acting and long-lasting insecticide that utilizes three active ingredients to eliminate up to 700 pests including mosquitoes, fleas, and pillbugs for up to 60 days.

For ultimate convenience, this product features a ready to spray design that is perfect for users who are looking for a quick insect control solution without the need of mixing or measuring.

Martin's Mosquito Pro RTS provides exceptional control over a broad-spectrum of insects by killing on contact and long after application against pests like mosquitoes by preventing their eggs and larvae from developing into adults.

Tools Needed

Martin's Mosquito Pro RTS comes ready to use with no other application tools necessary. You will need to connect this product to a garden hose to use.

How to Use

• Step 1: Determine how much Martin's Mosquito Pro RTS to use by measuring the square footage of the treatment area. To do this, measure the length and width of the treatment area in feet then multiply them together (length X width = square footage). Apply 1 bottle (32 oz.) of Martin's Mosquito Pro RTS per 4,000 to 8,000 sq. ft. for general pest control. To treat ornamental plants and shrubs, use 1 bottle (32 oz.) of product per 8,000 to 12,000 sq. ft. Two to three applications may be needed for hard to control insects.
• Step 2: To connect the Martin's Mosquito Pro RTS to a hose you will first need to shake the product well. Make sure control lever is in the “OFF” position. Attach to hose. Turn on water.
• Step 3: To spray, turn control lever to “ON” to begin spraying. When finished turn control lever to “OFF”. For use as a perimeter spray around the home, spray in a wide band around the foundation of the home, spraying no higher than 2 feet up the outside of the 8 house from the ground/foundation level and covering an area up to 7 feet wide on the ground extending out from the foundation. Be sure to start from the furthest point and move toward the faucet the hose is connected to in order to avoid walking into the treated area. For ornamental applications, spray underside of leaves and stems. Wet leaves and branches to the dripping point. Do not apply more than once every 14 days. Delay watering or mowing for 24 hours after application.

Where to Use

Martin's Mosquito Pro RTS can be applied to outdoor surfaces around homes and to outdoor ornamental plants next to foundations of buildings and to surfaces of buildings, including porches, screens, window frames, eaves, patios, and garages. This product can also be used on lawns, ornamental trees, shrubs, and flowers.

Do not apply this product to edible growing crops or stored raw agricultural commodities used for food or feed.

When to Use

Spray Martin's Mosquito Pro RTS in the early morning or late evening when temperatures are cooler if daytime air temperature is expected to exceed 85 degrees Fahrenheit.

Safety Information

Martin's Mosquito Pro RTS is safe to use around children and pets when applied according to the product label instructions. Always wear the proper personal protective equipment (PPE) when applying this product.

Do not allow children or pets to contact treated surfaces until spray has dried. Remove pets prior to spraying treatment area.

Special Considerations

Mosquitoes resting on treated Martin's Mosquito Pro RTS areas will die for up to 2 months after application, depending on rate applied and exposure of treated areas to weather conditions.