Martin's 80/20 Surfactant
CSI
Martin's 80/20 Surfactant
Martin's 80/20 Surfactant is a high quality non-ionic surfactant that enhances the coverage and penetration of insecticides, fungicides, herbicides, and defoliants.
As low as
$24.00
Only %1 left
SKU
Martins 80/20 Surfactant Product Page
Min : 24 - Max : 24
Martin's 80/20 Surfactant, manufactured by CSI, is an economical non-ionic surfactant that enhances the wetting and spreading of insecticides, fungicides, herbicides, acaricides, defoliants, desiccants, plant growth regulators, and nutritionals.
Made with a superior defoamer formulation that helps to suppress spray tank foaming, allowing homeowners and professional applicators to receive the most out of the pesticide material being used.
Martin's 80/20 Surfactant gives users all the power they need to better control against insects or foliage while also preventing waste of pesticide material.
Tools Needed
To use Martin's 80/20 Surfactant, you will need to use either a hose-end sprayer, handheld pump sprayer, backpack sprayer, or spray rig.
How to Use
- Step 1: Determine if Martin's 80/20 Surfactant can be mixed with your selected pesticide by reading its product label. Depending on the target site, treatment method, and pest the rates can vary. Mix 0.5 to 1 oz. of Martin's 80/20 Surfactant per gallon of spray solution.
- Step 2: To prepare Martin's 80/20 Surfactant, you will need to refer to the selected pesticide material label instructions. Once your sprayer has been filled according to the selected pesticide material instructions, you can then load the proper amount of Martin's 80/20 Surfactant.
- Step 3: After mixing your selected pesticide and Martin's 80/20 Surfactant together, apply as directed on the product label.
Where to Use
Martin's 80/20 Surfactant can be used with insecticides, herbicides, fungicides, acaricides, defoliants, desiccants, PGR's, and nutritionals.
This product is not for aquatic use.
When to Use
Use Martin's 80/20 Surfactant when you wish to increase the success and control of your insecticides, herbicides, fungicides, acaricides, defoliants, desiccants, PGR's, or nutritionals.
Safety Information
Martin's 80/20 Surfactant is safe to use around children and pets when applied according to the product label instructions. Always wear the proper personal protective equipment (PPE) when mixing and applying this product.
Special Considerations
Martin's 80/20 Surfactant will not control diseases, weeds, or insects on its own. You will need to mix this product with a pesticide.
| Availability | Online |
| Restricted Use | No |
| Shipping Restrictions | |
| Brand | CSI |
| Keith's Pro Tips | "Use enough Martin's 80/20 Surfactant to achieve good wetting, spreading and surface coverage without excessive runoff." |
| Product Drawbacks | Martin's 80/20 Surfactant is only for land applications, and cannot be used for aquatic areas. |
| Application Equipment | Backpack Sprayer |
| Application Methods | Broadcast Spray |
| Active Ingredient | Proprietary Blend of Nonionic Surfactants and Humectants 80% and Constituents Ineffective as Spray Adjuvant 20.0% |
| Product Type | Adjuvant |
| Formulation | Emulsifiable Concentrate (EC) |
| Application Rate | Mix 0.5 to 1 oz. of Martin's 80/20 Surfactant per gallon of spray solution. |
| Shelf Life | Martin's 80/20 Surfactant will last for 3 years when stored in a dry place between 40 degrees Fahrenheit and 120 degrees Fahrenheit. |
| Yield | 32 oz. of Martin's 80/20 Surfactant coverage will depend on how much material is used. |
| Use Sites | Outdoors |
| Time to Kill | Martin's 80/20 Surfactant will work instantly with any pesticide material it is mixed with. |
| Comparable Products | Agrifac Pro 80/20 Surfactant |
| Incompatible Home Siding | Brick, Hardie Plank, Stone Veneer, Wood, Vinyl |
| EPA Registration # | N/A |
| Restricted Use | No |
|---|---|
| Availability | Online |
| Signal Word | WARNING |
| Keith's Pro Tip | "Use enough Martin's 80/20 Surfactant to achieve good wetting, spreading and surface coverage without excessive runoff." |
| Time to Kill | Martin's 80/20 Surfactant will work instantly with any pesticide material it is mixed with. |
| Chemical Type | Adjuvant |
| Formulation | Emulsifiable Concentrate (EC) |
| Application Methods | Broadcast Spray |
| Product Drawbacks | Martin's 80/20 Surfactant is only for land applications, and cannot be used for aquatic areas. |
| Active Ingredient | Proprietary Blend of Nonionic Surfactants and Humectants 80% and Constituents Ineffective as Spray Adjuvant 20.0% |
| Application Equipment | Backpack Sprayer |
| Mix Rate | Mix 0.5 to 1 oz. of Martin's 80/20 Surfactant per gallon of spray solution. |
| Use Sites | Outdoors |
| Yield | 32 oz. of Martin's 80/20 Surfactant coverage will depend on how much material is used. |
| EPA Registration No. | N/A |
| Shelf Life | Martin's 80/20 Surfactant will last for 3 years when stored in a dry place between 40 degrees Fahrenheit and 120 degrees Fahrenheit. |
| Comparable Products | Agrifac Pro 80/20 Surfactant |
| Children or pets? | No |
| Property Characteristics | None |
Questions and Answers
