The Hypro Base Kit for 6500 Series Roller Pump is manufactured by Pentair/Hypro and is an important part of pesticide spray rigs. This base kit is crucially needed to help securely mount the Hypro 6500 Series Roller Pump to a professional spray rig unit. Constructed with cast-iron and stainless steel, the base kit is durable and built to last. Base kits all contain 1 base, 2 bolts and 2 washers.

Tools Needed

To use the Hypro Base Kit, you will need to install it onto a pesticide spraying rig. For this, you will need a Hypro 6500 Series Roller Pump and a socket wrench to mount the base securely. You will also need a strainer to catch any debris.

How to Use

• Step 1: Following system installation instructions that come with the HyproRoller Pump service manual, mount the base plate onto the spraying rig frame using the two bolts and washers to secure it into place.
• Step 2: Install the Hypro Roller Pump onto the base and tighten to secure it and make sure it doesn't budge.
• Step 3: Connect the necessary plumbing to the Roller Pump and then power the pump and spraying rig system on to test and ensure everything is working as intended and the pump base is not loose.

Where to Use

The Hypro Base Kit for 6500 Series Roller Pump is meant to be used on professional spraying rig frames to mount the Hypro 6500 series roller pumps.

When to Use

Use the Hypro Base Kit for 6500 Series Roller Pump when you need to mount a Hypro 6500 Series Roller Pump onto a spraying rig. This is a great pump for applications requiring high volume, but not necessarily high pressure.

Safety Information

The Hypro Base Kit for 6500 Series Roller Pump is safe to install when done so by following the service manual instructions. Use the proper PPE (gloves, long-sleeved clothing) when operating and maintaining the roller pump.

Special Considerations

When installing the base plate, lineup the pump shaft with a straight edge to assure they are aligned. Shims are suggested to raise the pump to the proper height so it is lined up better with engine gear shaft. The shaft ends should not touch.

*We do not accept returns on equipment or electronics, all sales are final. We do this to ensure that the products we send out are brand new, never opened, and fully operational for our customers to ensure the packages are covered by their respected manufacturer's warranties.