Fly Trap Pro 80 Stainless
Fly Trap Pro 80 Stainless

Fly Trap Pro 80 Stainless

PELSIS

Fly Trap Pro 80 Stainless

The Flytrap Professional is an effective, versatile professional fly killing light trap for trapping invading flies on commercial and residential properties. Comes with 2 high powered UV tubes and a glueboard. Can be conveniently mounted 7 different ways.
As low as $314.98
Only %1 left
SKU
Fly Trap Pro 80 Stainless Product Page
Min : 314.98 - Max : 314.98
+ -

Flytrap Professional 80 Stainless is manufactured by Pelsis and is an extremely service-friendly unit. The Flytrap Professional utilizes high powered UV tubes to attract flying pests and captures the lured flies on a pheromone impregnated glueboard, making it very effective in luring the maximum amount of flies to the unit. It can be mounted by seven different ways providing one of the most flexible and versatile professional fly light models on the market.

Tools Needed

To set up the Flytrap Professional 80, you will need a screwdriver or drill, as well as a level to make sure the product is hung evenly.

How to Use

  • Step 1: Before setting the fly light, mark the areas where the screws or anchors will be on the wall if you choose to have it wall mounted. The fly light should be positioned between four to six feet high, because this is normally the area where flies are most active. Be sure your markings are level. It is important to know the material you are drilling into. If your wall is drywall, you will need to screw in the anchors first for effective results. If you are drilling into wood, the anchors are not necessary. Once all of this is done, hold the bracket in place while drilling your anchors and/or screws in. Mount the cage onto the bracket, double-checking to make sure everything is level.
  • Step 2:  Once you have properly positioned or mounted the fly light, you can then fit the glupac glueboard in position along the two runners with the adhesive side facing the tubes.  
  • Step 3: Plug the cord into the fly light and plug the other side into an outlet. The product is now ready to use.

Where to Use

The Flytrap Professional is meant only for indoor use. Place the Flytrap Professional in food preparation areas and a variety of other sensitive areas where flies need to be controlled. The ideal height of a fly light is 6 feet off the ground as this is the typical height most flying insects are flying. If you place the fly lights any lower you can be simply drawing the flies into food prep areas. The product should not be used in barns, stables or similar locations.

When to Use

Use the Flytrap Professional when you are encountering flies in food prep and waste disposal areas which can practically be any time of the year. The Flytrap Professional should ideally be in operation for 24 hours a day, ensuring your premises are kept free of flying insects. Insects are most attracted to Flytrap Professional TM at night when there is no competition from daylight or other light sources.

Safety Information

The product is safe to use around pets and children. Please follow the label when it comes to proper usage for safety.

Special Considerations

The manufacturer recommends that glueboards be replaced monthly with a genuine glupac glueboard. Non-approved glueboards may invalidate the manufacturer guarantee. Bulbs should be replaced annually.

*We do not accept returns on equipment or electronics, all sales are final. We do this to ensure that the products we send out are brand new, never opened, and fully operational for our customers to ensure the packages are covered by their respected manufacturer's warranties.

AvailabilityOnline
Restricted UseNo
BrandPELSIS
Keith's Pro Tips"It is recommended to regularly clean the fly light when the glueboard is replaced. During replacement, the unit should be thoroughly wiped down with a damp cloth, removing any dirt buildup. Ensure the unit is completely dry before reconnecting it to the power supply."
Product DrawbacksGlueboards need to be replaced monthly and bulbs need to be replaced annually or more often if you use the unit frequently.
Target PestsFlying insects
Application EquipmentNone Needed
Application MethodsTrapping
Active IngredientN/A
Product TypeEquipment
FormulationGlue Trap
Application RateFly Trap Pro 80 Stainless comes ready to use.
Shelf LifeFly Trap Pro 80 Stainless will last for 3 years in storage when kept in dry, clean conditions.
YieldFly Trap Pro 80 Stainless covers 2600 sq ft
Use SitesIndoors
Time to KillTrapped flies lured toward the glueboard die shortly after being trapped.
Comparable ProductsSolutions Professional Fly Light 1x2
More Information
Restricted Use No
Availability Online
Keith's Pro Tip "It is recommended to regularly clean the fly light when the glueboard is replaced. During replacement, the unit should be thoroughly wiped down with a damp cloth, removing any dirt buildup. Ensure the unit is completely dry before reconnecting it to the power supply."
Target Pests Multi Flies
Time to Kill Trapped flies lured toward the glueboard die shortly after being trapped.
Chemical Type Equipment
Formulation Glue Trap
Application Methods Trapping
Product Drawbacks Glueboards need to be replaced monthly and bulbs need to be replaced annually or more often if you use the unit frequently.
Active Ingredient N/A
Application Equipment None Needed
Mix Rate Fly Trap Pro 80 Stainless comes ready to use.
Use Sites Indoors
Yield Fly Trap Pro 80 Stainless covers 2600 sq ft
Shelf Life Fly Trap Pro 80 Stainless will last for 3 years in storage when kept in dry, clean conditions.
Comparable Products Solutions Professional Fly Light 1x2
Children or pets? No
Property Characteristics None
Questions and Answers
No Question Found
© 2024 Solutions Pest & Lawn. All Rights Reserved