Female Plug 1/2" Fitting for Spray Rig
Female Plug 1/2" Fitting for Spray Rig

Female Plug 1/2" Fitting for Spray Rig

DIXON MANUFACTURING

Female Plug 1/2" Fitting for Spray Rig

The Female Plug 1/2" Fitting for Spray Rig is a hardware part for professional spray rigs. This female plug is a connector for the Udor spray gun and will allow you to easily connect the spray gun to the spray hose for pesticide rig operation.
Only %1 left
SKU
Female Plug 1/2" Fitting for Spray Rig product page
Min : 10.99 - Max : 10.99
+ -

The Female Plug 1/2" Fitting for Spray Rig is manufactured by Dixon Manufacturing and is a specialized male plug fitting meant to connect to spray guns such as the Udor spray gun. After being attached to a gun, it can then connect to a quick-connect coupler which would then connect to a spray hose of professional skid sprayers and spraying rigs. The part is made from stainless steel and necessary to complete a connection for spray rig applications.

Udor gun

Tools Needed

To use the Female Plug 1/2" Fitting for Spray Rig, you will need the Udor gun or other applicable spray tool or gun to attach the plug to as well as a Hanson quick connect coupler to also attach.

How to Use

  • Step 1: Attach the Female Plug to a Udor spray gun by taking the gun's threaded end and twisting it onto the opening on the fitting. Use a wrench if needed to make sure there is a secure fit.
  • Step 2: Once the plug is connected and secured tight you can then connect the Quick disconnect coupler to the female plug which should already be installed onto the hose you are using to attach the new plug. 
  • Step 3: After the gun to hose connection has been made and is secure, you are now ready to spray.

Where to Use

The Female Plug 1/2" Fitting for Spray Rig can be used on the Udor gun but the fitting can also be used for other gun types in order to connect the gun securely to a hose and coupler for professional spraying rig pesticide applications.

When to Use

Use the Female Plug 1/2" Fitting for Spray Rig when you are looking to connect your Udor gun or other applicable gun types to a pesticide spraying rig hose for large volume spray applications.

Safety Information

Female Plug 1/2" Fitting for Spray Rig is safe to use when installed as intended to the spray gun tool. When conducting spray applications with a pesticide spraying rig, be sure to wear proper PPE before spraying (gloves, protective eyewear, safety mask, etc.)

Special Considerations

We do not accept returns on equipment, all sales are final. We do this to ensure that the products we send out are brand new, never opened, and fully operational for our customers to ensure the packages are covered by their respected manufacturer's warranties.

AvailabilityOnline
Restricted UseNo
Shipping Restrictions
BrandDIXON MANUFACTURING
Keith's Pro Tips"To get a tighter seal or prevent any possible leaking between the plug and your Udor gun, use Teflon tape after installing the plug."
Product DrawbacksPart may wear and tear over time and will need replacement and/or service.
Target PestsN/A
Application EquipmentSpray Rig
Application MethodsInstallation
Active IngredientN/A
Product TypeEquipment
FormulationParts/Unit
Application RateN/A
Shelf LifeN/A
YieldN/A
Use SitesOutdoors
Time to KillN/A
Comparable ProductsMale Plug for JD9 Gun
More Information
Restricted Use No
Availability Online
Keith's Pro Tip "To get a tighter seal or prevent any possible leaking between the plug and your Udor gun, use Teflon tape after installing the plug."
Time to Kill N/A
Chemical Type Equipment
Formulation Parts/Unit
Application Methods Installation
Product Drawbacks Part may wear and tear over time and will need replacement and/or service.
Active Ingredient N/A
Application Equipment Spray Rig
Mix Rate N/A
Use Sites Outdoors
Yield N/A
Shelf Life N/A
Comparable Products Male Plug for JD9 Gun
Children or pets? No
Property Characteristics None
Questions and Answers
No Question Found
© 2024 Solutions Pest & Lawn. All Rights Reserved