Drexel AMS - All Defoamer Drift Reducer Surfactant, manufactured by Drexel, is a multi-use conditioning blend of Ammonium sulfate, defoaming agent, drift-reduction solution and surfactant in one convenient, economical formulation.

Engineered with a full non-ionic surfactant and ammonium ions to enhance pesticides normally affected by hard water by increasing the products spread on target surface, performance, and enhanced absorption.

Drexel AMS - All Defoamer Drift Reducer Surfactant is a specially formulated surfactant that decreases the pesticides droplet size to lessen possible chemical drifts.

Tools Needed

Drexel AMS - All Defoamer Drift Reducer Surfactant will need to be applied with a pesticide that is labeled for mixture with Ammonium sulfate in a spray rig.

How to Use

• Step 1: Read your selected pesticide label to see if it can be mixed with Drexel AMS - All Defoamer Drift Reducer Surfactant. Apply 1 to 5 gallons of Drexel AMS - All Defoamer Drift Reducer Surfactant per 100 gallons of spray solution. Use higher rate when extreme hard water conditions exist.
• Step 2: Fill your selected sprayer with 1/2 to 2/3 of the required amount of clean water. While shaking the spray tank, add the measured amount of Drexel AMS - All Defoamer Drift Reducer Surfactant, additional Ammonium sulfate if needed, then selected pesticide. Pour the remaining half of water into the spray and continue shaking until solution is evenly mixed.
• Step 3: Spray the pesticide solution mixed with Drexel AMS - All Defoamer Drift Reducer Surfactant according to the selected products label.

Where to Use

Drexel AMS - All Defoamer Drift Reducer Surfactant may be used on crops and foliage with pesticides labeled to be mixed with Ammonium sulfate.

When to Use

Apply Drexel AMS - All Defoamer Drift Reducer Surfactant when there is a need to increase full functionality of pesticides that may be negatively impacted by hard water conditions.

Safety Information

Drexel AMS - All Defoamer Drift Reducer Surfactant is safe to use around children and pets when applied according to the product label instructions. Always wear the proper personal protective equipment (PPE) when mixing and applying this product.

Do not let children and pets enter treated areas until it has completely dried.

Special Considerations

Under extremely hard water conditions, additional Ammonium sulfate solution may also be required with Drexel AMS - All Defoamer Drift Reducer Surfactant.