Custom Spray Rig Frame
Custom Spray Rig Frame
The Custom Spray Rig Frame is a professional pesticide spraying rig frame that is used to securely house all the spraying rig components. This frame is made from aluminum with every seam being welded, not bolted. It is lightweight and durable, measuring at 28" x 44" and 40". For a frame that is built to last for the long haul, purchase this frame as the base for your pesticide spraying rig.
Tools Needed
The spraying rig frame will need to be mounted securely with tools onto a truck bed or anywhere you would like for it to be fixed.
How to Use
- Step 1:  Place your frame on a surface or on where you would like to mount it such in the back of a truck or on a trailer. Bolt it securely.
- Step 2: Begin to add the spraying rig components such as the tank, pump, motor and hose reel to the frame and ensure they are secured.
- Step 3: After you have attached all the spray components, power on the sprayer to test it out and make sure that nothing is loose.
Where to Use
The Custom Spray Rig Frame can be used to hold the components of a pesticide skid sprayer. The frame can be fixed on a truck bed, a trailer or any surface where it is needed for regular large volume sprayings.
When to Use
The Custom Spray Rig Frame should be used when your frame is damaged or worn.
Safety Information
The Custom Spray Rig Frame is safe to install around humans and pets when done so properly and when following the safety instructions of your skid sprayer frame manual. Make sure to set the correct pressure at the pump. For every 100 feet of hose, 10 pounds of pressure is lost.
Special Considerations
*We do not accept returns on equipment or electronics, all sales are final. We do this to ensure that the products we send out are brand new, never opened, and fully operational for our customers to ensure the packages are covered by their respected manufacturer's warranties.
Restricted Use | No |
Shipping Restrictions | |
Brand | SOLUTIONS |
Keith's Pro Tips | "Due to the frame being made from aluminum, it won't rust and never has to be painted. 10 years from now it's going to look the same as it did on day 1." |
Product Drawbacks | Part may wear and tear over time and will need replacement and/or service. |
Application Equipment | Spray Rig |
Application Methods | Injection |
Active Ingredient | N/A |
Product Type | Equipment |
Formulation | Parts/Unit |
Application Rate | N/A |
Shelf Life | N/A |
Yield | N/A |
Use Sites | Outdoors |
Comparable Products | Custom Spray Rig |
Restricted Use | No |
---|---|
Keith's Pro Tip | "Due to the frame being made from aluminum, it won't rust and never has to be painted. 10 years from now it's going to look the same as it did on day 1." |
Chemical Type | Equipment |
Formulation | Parts/Unit |
Application Methods | Injection |
Product Drawbacks | Part may wear and tear over time and will need replacement and/or service. |
Active Ingredient | N/A |
Application Equipment | Spray Rig |
Mix Rate | N/A |
Use Sites | Outdoors |
Yield | N/A |
Shelf Life | N/A |
Comparable Products | Custom Spray Rig |
Children or pets? | No |
Property Characteristics | None |
-
Q:Do you recommend drilling through the frame to bolt it down and if so is their anywhere not to drill?2/22/24A:You can drill through it anywhere. For bolting to a truck bed we typically drill through the center c-chanel supports in between the tank support and the plate so it can be easily accessed.
Phoenix
2/22/24 -
Q:Will a 300 gallon tank fit on it as well as the motor , pump & reel ?10/19/22A:It would be best to speak directly with our customer service team. This way you can be directed to our distribution center, where you can speak to an associate about custom rigs/parts and other specifications. 800-479-6583
Amanda Chavez
10/19/22Certified Buyer -
Q:How much does it weigh?4/10/21A:It weighs about 45 lbs
Zach
2/22/24 -
Q:Is this frame able to be picked up with a fork lift?1/18/18A:Yes, we can arrange for the frame to be ready for pickup, we have fork lifts to load into trucks.
Camille Landry
1/19/18Certified Buyer