CuPro 5000 DF
CuPro 5000 DF
CuPRO 5000 DF, manufactured by SePro Corporation, is a professional-quality fungicide/bactericide that protects against various common fungal diseases (like leaf spot, powdery mildew, blight and anthracnose) that may infect plants in greenhouses, nurseries and landscapes.
CuPRO 5000 comes in a dry, easy to mix flowable formulation which will be applied to the plants roots. Once applied to the roots or lower stems of the plant the product will begin to have an immediate effect. It has an active ingredient of 61.3% of copper hydroxide, which allows a quicker management of diseases within your foliage and crops.
Tools Needed
To use cupro 5000 df you will need a high volume application sprayer such as a pesticide spraying rig or sprinkler system.
How to Use
- Step 1: Determine how much cupro 5000 df you need, by calculating the acreage of the treatment area. To do this, you will first find the square footage of the treatment area. Follow this formula to determine the sq. ft. of the treatmet area (length X width = square footage). For acreage, you will divide the measured square footage by 4,840. The application rate depends on the location and what is being treated, ranging from 4 to 6 Ibs of cupro 5000 df per 100 gallons of water per acre. The maxiumum of cupro 5000 df that can be applied is 2.5 Ibs of product per acre. Refer to the label for specific application rates based on your needs.
- Step 2: To mix, fill your sprayer halfway with the appropriate amount of water and then slowly add the measured amount of CuPro 5000 DF. Agitate during the entire process and then add any spreaders, stickers, insecticide, nutrients and others adjuvants last.
- Step 3: Apply the cupro 5000 df mixture as a thorough cover spray and then reapply as needed in 7 to 14 day intervals to control diseases.
Where to Use
CuPro 5000 DF can be used to control bacterial and fungal disease of foliage, crops, flowers and stems on ornamentals in greenhouses, shade houses, outdoor nurseries, and outdoor landscape plantings.
This product is not recommend to make contact with any metal surfaces such as cars, houses, or lawn furniture.
When to Use
Apply cupro 5000 df at the first sign of disease and repeat at 7 to 14 day intervals.
Safety Information
CuPro 5000 DF is safe to use when it has been applied properly according to the label and has been given time to dry. Always wear the appropriate personal protective equipment (PPE) before mixing and applying cupro 5000 df (gloves, protective eyewear, particle mask, long sleeve clothing, closed-toed shoes).
Special Considerations
Depending upon the equipment used and the specific crop, the spray volume applied per acre will differ. Refer to the label for equipment manufacture specifications and environmental conditions are aligned with state and local authority, refer to the product label for more details.
Availability | Online |
Restricted Use | No |
Shipping Restrictions | AK, CA, CT, HI, IN, MI, NY, OR, RI, SC, VT, WA |
Brand | SEPRO TECHNOLOGIES |
Keith's Pro Tips | "Before applying cupro 5000 df to your treatment area, test a small portion of your plants with the product to see how your foliage compatibility and tolerance reacts. This small treatment method can save a large amount of your plants and crops. Without this testing method, you are risking a large scale application with severe damage to your plants." |
Product Drawbacks | Environmental conditions such as long periods of wet weather, acid rain, and other weather factors can alter the pH of the leaf surface and affect the performance of cupro 5000 df. Resulting in possible phytotoxicity or less effectiveness of the product. |
Target Pests | Algal Leaf Spot, Alternaria, Alternaria Flower Spot, Anthracnose, Bacterial Leaf Spot, Botrytis Blight, Botrytis Bud Rot, Botrytis Gray Mold, Canker, Cercospora, Cercospora Leaf Spot, Colletotrichum spp, Downy Mildew, Entomosporium Maculata, Filbert Blight, Fire Blight, Flower Rot, Fungal Leaf Spot, Leaf Blight, Leaf Spot, Leaf Spots, Needle Blight, Needlecasts, Pestalotia Lead Spot, Phomopsis Stem Blight, Phomopsis Twig Dieback, Pseudomonas Leaf Spot, Rhabdocline Needlecast, Scab, Septoria Leaf Spot, Tar Leaf Spot, Tip Blight, Twig Blight, Volutella Leaf Blight, and Xanthomonas Leaf Spot. |
Application Equipment | Misting System, Spray Rig |
Application Methods | Automatic Misting, Broadcast Spray |
Active Ingredient | Copper Hydroxide 61.3% |
Product Type | Fungicide |
Formulation | Water-Soluble Powder |
Application Rate | You will use 1.5 to 5 lbs per acre. For more specific application rates please refer to the label. |
Shelf Life | CuPro 5000 DF will last up to 3 years in storage when stored in a cool, dry place. |
Yield | When used at the rate of 1.5 lbs per acre, a 3 lb container of CuPro DF 5000 can treat at least 2 acres. |
Use Sites | Outdoors |
Time to Kill | CuPro 5000 DF protects plants from disease and bacteria for 7 to 10 days. Retreatment should be done at a minimum interval of 7 days. |
Comparable Products | Kocide Copper Fungicide |
Incompatible Home Siding | Metal |
EPA Registration # | 80289-2-67690 |
Restricted Use | No |
---|---|
Shipping Restrictions | AK, CA, CT, HI, IN, MI, NY, OR, RI, SC, VT, WA |
Availability | Online |
Signal Word | DANGER |
Keith's Pro Tip | "Before applying cupro 5000 df to your treatment area, test a small portion of your plants with the product to see how your foliage compatibility and tolerance reacts. This small treatment method can save a large amount of your plants and crops. Without this testing method, you are risking a large scale application with severe damage to your plants." |
Target Pests Multi | Algal Leaf Spot, Alternaria, Alternaria Flower Spot, Anthracnose, Bacterial Leaf Spot, Botrytis Blight, Botrytis Bud Rot , Botrytis Gray Mold, Cankers, Cercospora, Cercospora Leaf Spot, Colletotrichum, Downy Mildew, Entomosporium Maculata , Filbert Blight, Fire Blight, Flower Rot , Fungal Leaf Spot, Leaf Blight, Leafspot, Needle Blight, Needlecasts, Pestalotia Leaf Spot, Phomopsis Stem Blight, Phomopsis Twig Blight, Pseudomonas Leaf Spot, Rhabdocline Needlecast, Scabs, Septoria Leaf Spot, Tar Leaf Spot , Tip Blight, Twig Blight, Volutella Leaf Blight, Xanthomonas Leaf Spot |
Time to Kill | CuPro 5000 DF protects plants from disease and bacteria for 7 to 10 days. Retreatment should be done at a minimum interval of 7 days. |
Chemical Type | Fungicide |
Formulation | Water-Soluble Powder |
Application Methods | Automatic Misting, Broadcast Spray |
Product Drawbacks | Environmental conditions such as long periods of wet weather, acid rain, and other weather factors can alter the pH of the leaf surface and affect the performance of cupro 5000 df. Resulting in possible phytotoxicity or less effectiveness of the product. |
Active Ingredient | Copper Hydroxide 61.3% |
Application Equipment | Misting System, Spray Rig |
Mix Rate | You will use 1.5 to 5 lbs per acre. For more specific application rates please refer to the label. |
Low Use Rate | 0.72 oz./1,000 sq. ft. |
High Use Rate | 7.27 oz./1,000 sq. ft. |
Use Sites | Outdoors |
Yield | When used at the rate of 1.5 lbs per acre, a 3 lb container of CuPro DF 5000 can treat at least 2 acres. |
EPA Registration No. | 80289-2-67690 |
Shelf Life | CuPro 5000 DF will last up to 3 years in storage when stored in a cool, dry place. |
Comparable Products | Kocide Copper Fungicide |
Children or pets? | Yes |
Property Characteristics | None |
-
Q:what is the mixing rate of cupro 5000 for spanish ball moss on crepe myrtle ?12/22/21A:Apply 9 to 12 pounds of CuPro 5000 DF in 100 gallons of water, using 1 1/2 gallons of spray per foot of tree height. However, only apply this product during the spring when trees are dormant. Due to the large number of species and varieties of ornamental and nursery plants and wide range of growing conditions, it is impossible to test every one for sensitivity to CuPro 5000 DF. Neither the manufacturer nor the seller has determined whether or not this product can be safely used on ornamental or nursery plants not listed on this label. It would be best to test a small area of your crepe myrtle then observe for 7 to 10 days before treating the entire tree.
Amanda Chavez
12/23/21Certified Buyer